Skip to content

IGCSE Physics · November 2022 · Paper 61 · Difficulty 3 · Standard

Question 3

3

A student investigates the effect of the starting temperature on the cooling rate of water.

Fig. 3.1 shows the apparatus used.

(a)

The thermometer in Fig. 3.2 shows the room temperature $\theta_\text{R}$ at the beginning of the experiment. Record $\theta_\text{R}$.

$\theta_\text{R} =$ °C[1]

(b)

The student uses a measuring cylinder to pour $200\text{ cm}^3$ of hot water into the beaker.

He records in Table 3.1 the temperature $\theta$ of the hot water at time $t = 0$.

He measures, and records in Table 3.1, the water temperature every $30\text{ s}$.

Complete the time $t$ column in Table 3.1.[1]

Table 3.1

$t / \text{s}$$\theta / \text{ }^\circ\text{C}$
088
82
78
74
71
69
67
(c)

Calculate the decrease in temperature $\Delta\theta_1$ between $t = 0$ and $t = 180\text{ s}$.

$\Delta\theta_1 =$

Calculate the average rate of cooling $C_1$ of the water using the equation $C_1 = \frac{\Delta\theta_1}{\Delta t}$, where $\Delta t = 180\text{ s}$. Include the unit.

$C_1 =$ [2]

(d)

The student empties the beaker.

He pours warm water into the same beaker.

He records in Table 3.2 the temperature $\theta$ of the warm water at time $t = 0$.

He measures, and records in Table 3.2, the water temperature every $30\text{ s}$.

Table 3.2

$t / \text{s}$$\theta / \text{ }^\circ\text{C}$
074
3071
6070
9068

Using Table 3.2, calculate the decrease in temperature $\Delta\theta_2$ between $t = 0$ and $t = 90\text{ s}$.

$\Delta\theta_2 =$

Calculate the average rate of cooling $C_2$ of the water using the equation $C_2 = \frac{\Delta\theta_2}{\Delta t}$, where $\Delta t = 90\text{ s}$.

$C_2 =$ [1]

(e)

A student suggests that the rate of cooling of water depends on the initial temperature of the water.

Write a conclusion about the effect of the initial temperature of water on the rate of cooling of the water, based on the results. Justify your conclusion by reference to values from the results.

conclusion

justification [2]

(f)

State two requirements when reading the volume of water in a measuring cylinder in order to obtain an accurate result.

[2]

(g)

Suggest two possible variables that the student should keep constant.

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Read the thermometer at $\theta_R = \mathbf{23}\,\mathrm{°C}$.

3(b)

  • Add $30\,\mathrm{s}$ each time. The missing times are $\mathbf{30}$, $\mathbf{60}$, $\mathbf{90}$, $\mathbf{120}$, $\mathbf{150}$ and $\mathbf{180}\,\mathrm{s}$.

3(c)

  • Use $\Delta\theta_1 = \theta_{\mathrm{initial}}-\theta_{\mathrm{final}} = 88\,\mathrm{°C}-67\,\mathrm{°C} = \mathbf{21}\,\mathrm{°C}$.
  • Use $C_1 = \Delta\theta_1/\Delta t = 21\,\mathrm{°C}/180\,\mathrm{s} = \mathbf{0.12}\,\mathrm{°C/s}$.

3(d)

  • Use $\Delta\theta_2 = \theta_{\mathrm{initial}}-\theta_{\mathrm{final}} = 74\,\mathrm{°C}-68\,\mathrm{°C} = \mathbf{6}\,\mathrm{°C}$.
  • Use $C_2 = \Delta\theta_2/\Delta t = 6\,\mathrm{°C}/90\,\mathrm{s} = \mathbf{0.067}\,\mathrm{°C/s}$.

3(e)

  • A higher starting temperature gives a faster average cooling rate.
  • At $88\,\mathrm{°C}$ the rate is $0.12\,\mathrm{°C/s}$; at $74\,\mathrm{°C}$ it is $0.067\,\mathrm{°C/s}$.

3(f)

  • View the water level at eye level, with your line of sight at right angles to the scale, to avoid parallax.
  • Read the scale at the bottom of the meniscus.

3(g)

  • Keep the volume of water the same in both runs.
  • Keep the room temperature the same.
Original question

Log in or create account

IGCSE, A-Level & AP