Skip to content

IGCSE Physics · November 2022 · Paper 41 · Difficulty 4 · Challenging

Question 7

7

The electric starter motor in a car is switched on and off using a relay.

The relay consists of a plastic case and two flexible springy strips, X and Y, which are made of soft iron. These iron strips act as the switch when a circuit is connected between the terminals W and Z.

Fig. 7.1 shows X, Y and the plastic case.

Fig. 7.2 shows the equipment from Fig. 7.1 inside a magnetising coil. The magnetising coil is in series with the $12\text{ V}$ car battery and switch S, which is open.

(a)

Switch S is now closed.

Explain what happens to the springy iron strips X and Y.[3]

(b)

The power of the starter motor is $1.8\text{ kW}$ and it is also operated by the car battery.

(i)

Calculate the current in the starter motor when it is used.

current = [2]

(ii)

The starter motor circuit is connected between terminals W and Z.

Explain why copper wires with a large cross-sectional area are used for this circuit.[2]

(c)

Fig. 7.3 shows the relay and the symbols for the car battery and the starter motor.

The springy iron strips X and Y act as the switch for the starter motor circuit.

Complete the circuit diagram for the motor circuit.[2]

[Total: 9]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

7(a)

  • The current in the coil magnetises both iron strips.
  • Opposite poles form at the nearby ends, so the strips attract.
  • The strips touch and complete the circuit between W and Z.

7(b)(i)

  • Use $P = VI$, so $I = P/V$.
  • $I = (1800\,\mathrm{W})/(12\,\mathrm{V}) = \mathbf{150}\,\mathrm{A}$.

7(b)(ii)

  • A large cross-sectional area gives the wires a low resistance.
  • This reduces heating when the large motor current flows.

7(c)

  • Connect the battery, motor and terminals W and Z in one series loop.
  • The iron strips then act as the switch in series with the motor and battery.
Original question

Log in or create account

IGCSE, A-Level & AP