Skip to content

IGCSE Physics · November 2021 · Paper 62 · Difficulty 4 · Challenging

Question 2

2

A student investigates the resistances of a resistor and a lamp.

Fig. 2.1 shows the first circuit arrangement.

Fig. 2.1
(a)

She records $V_S$, the potential difference (p.d.) across the resistor R, and the current $I_S$ in the circuit. The meters are shown in Fig. 2.2 and Fig. 2.3.

(i)

Write down the readings. Include the units for potential difference, current or resistance where appropriate in all parts of the question.

Fig. 2.2 Fig. 2.3

$V_S$ =

$I_S$ = [2]

(ii)

Calculate $R_S$, the resistance of resistor R, using the equation $R_S = \frac{V_S}{I_S}$.

$R_S$ = [2]

(b)

The student replaces the resistor with the lamp. She records $V_L$ the potential difference across the lamp and the current $I_L$ in the circuit.

$V_L$ = 1.7

$I_L$ = 0.35

Calculate $R_L$, the resistance of the lamp, using the equation $R_L = \frac{V_L}{I_L}$.

$R_L$ = [2]

(c)

The student connects the resistor R in series with the lamp. She connects the voltmeter to record $V_C$, the potential difference across the series combination of the resistor and the lamp. Draw the circuit diagram for this arrangement.[2]

(d)

The student records $V_C$ the potential difference across the resistor and the lamp in series and the current $I_C$ in the circuit.

$V_C$ = 1.7

$I_C$ = 0.21

Calculate $R_C$, the combined resistance of the resistor and the lamp connected in series, using the equation $R_C = \frac{V_C}{I_C}$.

$R_C$ = [1]

(e)

State and explain briefly whether the results show that $R_S + R_L = R_C$ within the limits of experimental accuracy.

statement

explanation

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • Read each meter scale at the pointer. The potential difference is $\mathbf{1.8}\,\mathrm{V}$ and the current is $\mathbf{0.38}\,\mathrm{A}$.

2(a)(ii)

  • Use $R_S = V_S/I_S$.
  • $R_S = 1.8\,\mathrm{V}/0.38\,\mathrm{A} = \mathbf{4.7}\,\Omega$.

2(b)

  • Use $R_L = V_L/I_L$.
  • $R_L = 1.7\,\mathrm{V}/0.35\,\mathrm{A} = \mathbf{4.86}\,\Omega$.

2(c)

  • Draw the power supply, ammeter, resistor and lamp in one series loop, using the correct circuit symbols.
  • Connect the voltmeter in parallel across both the resistor and the lamp together.

2(d)

  • Use $R_C = V_C/I_C$.
  • $R_C = 1.7\,\mathrm{V}/0.21\,\mathrm{A} = \mathbf{8.1}\,\Omega$.

2(e)

  • No. The sum $R_S + R_L = 4.7\,\Omega + 4.86\,\Omega = 9.56\,\Omega$.
  • This is more than $10\%$ above $R_C = 8.1\,\Omega$, so the values are too far apart to agree within experimental accuracy.
Original question

Log in or create account

IGCSE, A-Level & AP