Skip to content

IGCSE Physics · November 2021 · Paper 62 · Difficulty 3 · Standard

Question 1

1

A student determines the density of a block of wood.

(a)

Fig. 1.1 shows one face of the block of wood that the student uses.

(i)

Measure the length $l$ and width $w$ of the block of wood. Fig. 1.1 is drawn actual size.

$l$ = cm

$w$ = cm[1]

(ii)

The student measures the height $h$ of the block of wood.

$h$ = 4.0cm

Calculate the volume $V$ of the block of wood using the equation $V = l \times w \times h$.

$V$ = $\text{cm}^3$[1]

(iii)

The student measures the mass $m$ of the block of wood on a balance.

Write down the mass $m$ of the block as shown in Fig. 1.2. Give your answer to the nearest gram.

$m$ = g[1]

(iv)

Calculate the density $\rho$ of the wood using the equation $\rho = \frac{m}{V}$. Give your answer to a suitable number of significant figures for this experiment and include the unit.

$\rho$ = [2]

(b)

The student places the block of wood carefully in water in a glass dish. The wood floats as shown in Fig. 1.3.

(i)

Using Fig. 1.3, estimate, without taking a measurement, the volume $V_1$ of wood that is below the water surface.

$V_1$ = $\text{cm}^3$[1]

(ii)

Calculate $m_W$, the mass of water with volume $V_1$, using the equation $m_W = \rho_W \times V_1$, where $\rho_W = 1.00$ in the same units as $\rho$ in part (a)(iv).

$m_W$ = [1]

(c)

A student suggests that the mass $m$ of the block of wood should be equal to the mass $m_W$ of the water with volume $V_1$.

(i)

Calculate the difference $d$ between your values of $m$ and $m_W$.

$d$ = [1]

(ii)

Discuss whether the difference $d$ is small enough to conclude that $m = m_W$.[1]

(d)

Another student wants to obtain a more accurate value for $V_1$. He uses the method of floating the block of wood in water as described in (b).

Suggest how the student could obtain a more accurate value by taking a measurement.[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • Measure the two edges of the actual-size drawing with a ruler. The length is $\mathbf{5.1}\,\mathrm{cm}$ and the width is $\mathbf{4.7}\,\mathrm{cm}$.

1(a)(ii)

  • Use $V = lwh$.
  • $V = (5.1\,\mathrm{cm})(4.7\,\mathrm{cm})(4.0\,\mathrm{cm}) = \mathbf{95.88}\,\mathrm{cm^3}$.

1(a)(iii)

  • The balance reads $63.92\,\mathrm{g}$. Rounded to the nearest gram, the mass is $\mathbf{64}\,\mathrm{g}$.

1(a)(iv)

  • Use $\rho = m/V$.
  • $\rho = 64\,\mathrm{g}/95.88\,\mathrm{cm^3} = \mathbf{0.67}\,\mathrm{g/cm^3}$ to two significant figures.

1(b)(i)

  • About five eighths of the block is below the water. The whole block has volume about $96\,\mathrm{cm^3}$.
  • So $V_1 \approx \frac{5}{8}(96\,\mathrm{cm^3}) = \mathbf{60}\,\mathrm{cm^3}$.

1(b)(ii)

  • Use $m_W = \rho_W V_1$.
  • $m_W = (1.00\,\mathrm{g/cm^3})(60\,\mathrm{cm^3}) = \mathbf{60}\,\mathrm{g}$.

1(c)(i)

  • Use $d = m - m_W$ to find the difference.
  • $d = 64\,\mathrm{g} - 60\,\mathrm{g} = \mathbf{4}\,\mathrm{g}$.

1(c)(ii)

  • Yes. The difference is $4\,\mathrm{g}$, which is small compared with the $64\,\mathrm{g}$ mass of the wood, especially since $V_1$ is an estimate.

1(d)

  • Float the block and mark the water level on it. Remove the block and measure the depth that was under water.
  • Multiply this depth by the cross-sectional area of the block to find the submerged volume.
Original question

Log in or create account

IGCSE, A-Level & AP