Skip to content

IGCSE Physics · November 2021 · Paper 52 · Difficulty 3 · Standard

Question 3

3

In this experiment, you will investigate the image produced by a lens.

Carry out the following instructions, referring to Fig. 3.1.

(a)

• Place the lens a distance $u = 20.0\text{ cm}$ from the illuminated object.

  • Move the screen until a clearly focused image is formed on the screen.
  • Measure the distance $v$ between the centre of the lens and the screen.
(i)

Record $v$ in Table 3.1.[1]

(ii)

Calculate, and record in Table 3.1, $\frac{u}{v}$.[1]

(iii)

Repeat the procedure for $u = 25.0\text{ cm}$, $u = 30.0\text{ cm}$, $u = 35.0\text{ cm}$ and $u = 40.0\text{ cm}$.[1]

Table 3.1

$u/\text{cm}$$v/\text{cm}$$\frac{u}{v}$
20.0
25.0
30.0
35.0
40.0
(b)

Plot a graph of $u/\text{cm}$ ($y$-axis) against $\frac{u}{v}$ ($x$-axis). Start the $y$-axis at $u = 15.0\text{ cm}$.[4]

(c)

Use your graph to find the value of $u$ when $\frac{u}{v} = 1.0$. Show clearly on the graph how you obtained the necessary information.

$u = ....................................................$[2]

(d)

Suggest one practical difficulty with this experiment. Explain briefly how you would try to overcome this difficulty in order to obtain accurate results.

suggestion

explanation [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • For $u = 20.0\,\mathrm{cm}$, focus the image on the screen and measure from the lens centre to the screen. Record this distance as $v$ in $\mathrm{cm}$.

3(a)(ii)

  • Use $u/v$ for each row. Divide each $u$ value by its measured $v$ value in the same units: the result has no unit.
  • For the first row, $u/v = \mathbf{20.0/v}$, using the numerical value of $v$ in $\mathrm{cm}$.

3(a)(iii)

  • For each new $u$, refocus the image and record $v$ in $\mathrm{cm}$. The five $v$ readings should decrease as $u$ increases.
  • Calculate $u/v$ for each row and give these ratios to a consistent number of significant figures or decimal places.

3(b)

  • Label the horizontal axis $u/v$ and the vertical axis $u/\mathrm{cm}$. Start the vertical scale at $15.0\,\mathrm{cm}$ and choose suitable scales.
  • Plot all five points from your table to within half a small square, then draw a thin, continuous best-fit line.

3(c)

  • From $u/v = 1.0$ on the horizontal axis, draw a vertical line to the best-fit line, then a horizontal line to the $u$ axis.
  • Read $u$ in $\mathrm{cm}$ to within half a small square. Its value depends on your graph.

3(d)

  • It can be hard to judge where the image is most sharply focused.
  • Move the screen slowly back and forth around the best position to find the sharpest image.
Original question

Log in or create account

IGCSE, A-Level & AP