Skip to content

IGCSE Physics · November 2021 · Paper 43 · Difficulty 4 · Challenging

Question 3

3
(a)

A gas bubble is released at the bottom of a lake.

Atmospheric pressure is $1.0 \times 10^{5} \text{Pa}$. The density of water is $1000 \text{kg/m}^{3}$. The temperature of the water in the lake is constant.

(i)

The gas bubble rises to the surface. The volume of the gas bubble increases as it rises higher in the water.

Explain why the volume of the bubble increases.

[2]

(ii)

The volume of the gas bubble is $0.40 \text{cm}^{3}$ when it is $3.0 \text{m}$ below the surface of the lake.

Calculate the volume of the gas bubble when it is $0.50 \text{m}$ below the surface of the lake.

volume = [4]

(b)

Fig. 3.1 shows a diagram of a hydraulic press used to compress paper for recycling.

When a force is applied to piston A, it causes a pressure in the oil. This pressure produces an upwards force on piston B. As piston B moves, it compresses the paper.

A small quantity of air leaks into the oil.

Suggest and explain the effect the air has on the operation of the hydraulic press.

[2]

[Total: 8]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • As the bubble rises, the water pressure on it decreases.
  • At constant temperature, a lower gas pressure means a larger volume.

3(a)(ii)

  • Use $p = p_{\mathrm{atm}} + \rho gh$ for the total pressure and $p_1V_1 = p_2V_2$ for the gas.
  • $p_1 = 1.0\times10^5\,\mathrm{Pa} + (1000\,\mathrm{kg/m^3})(10\,\mathrm{N/kg})(3.0\,\mathrm{m}) = 1.3\times10^5\,\mathrm{Pa}$.
  • $p_2 = 1.0\times10^5\,\mathrm{Pa} + (1000\,\mathrm{kg/m^3})(10\,\mathrm{N/kg})(0.50\,\mathrm{m}) = 1.05\times10^5\,\mathrm{Pa}$.
  • $V_2 = (1.3\times10^5\,\mathrm{Pa})(0.40\,\mathrm{cm^3})/(1.05\times10^5\,\mathrm{Pa}) = \mathbf{0.50}\,\mathrm{cm^3}$.

3(b)

  • The air can be compressed, so some movement of piston A compresses the air.
  • Piston B then compresses the paper less.
Original question

Log in or create account

IGCSE, A-Level & AP