Skip to content

IGCSE Physics · June 2025 · Paper 52 · Difficulty 4 · Challenging

Question 4

4

Hot water is poured into a glass beaker and allowed to cool down for 5 minutes.

Plan an experiment to investigate whether the rate of cooling of the hot water depends upon the initial temperature of the hot water.

The rate of cooling of the water can be calculated using the equation:

$$\text{rate of cooling} = \frac{\text{decrease in temperature}}{\text{time taken}}.$$

You are provided with:

  • a supply of cold water
  • an electric kettle
  • a $250\text{ cm}^3$ glass beaker
  • a measuring cylinder.

You may use any other common laboratory apparatus.

You are not required to do this investigation.

In your plan, include:

  • any other apparatus needed
  • a brief description of the method, including what you will measure and how you will make sure your measurements are accurate
  • the variables you will control
  • a results table to record your measurements (you are not required to enter any readings in the table)
  • how you will process your results to reach a conclusion.

You may include a labelled diagram.[7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

  • Use a thermometer and stopwatch. Heat water; measure its initial temperature $\theta_i$ and its temperature $\theta_f$ after 5 minutes. Stir gently before reading; keep the thermometer bulb in the water, away from the glass.
  • Repeat for at least five initial temperatures. Keep the water volume and room temperature the same. Repeat each run and calculate mean results.
  • Table headings: initial temperature $\theta_i/\mathrm{°C}$; final temperature $\theta_f/\mathrm{°C}$; cooling rate $r/\mathrm{°C/min}$.
  • Cooling rate $r=(\theta_i-\theta_f)/t$, with $t=5\,\mathrm{min}$ and temperatures in $\mathrm{°C}$. Plot cooling rate against initial temperature to see how the rate depends on it.
Original question

Log in or create account

IGCSE, A-Level & AP