Skip to content

IGCSE Physics · June 2025 · Paper 51 · Difficulty 3 · Standard

Question 1

1

In this experiment, you will determine the density of a ball.

(a)

Place the ball between the two blocks as seen from above in Fig. 1.1.

(i)

Describe how to use the apparatus in Fig. 1.1 to take two measurements to determine the diameter $d$ of the ball. You may draw on Fig. 1.1 to help your description.[2]

(ii)

Using the blocks as shown in Fig. 1.1, take two measurements to determine the diameter $d$ of the ball.

measurement 1 = cm

measurement 2 = cm[1]

(iii)

Use your measurements to calculate a value for the diameter $d$ of the ball. Show your working.

$d$ = cm[1]

(b)

Calculate the volume $V$ of the ball using the equation $V = 0.52d^{3}$.

Include the unit.

$V$ = [2]

(c)
(i)

Use the balance to measure the mass $m_D$ of the dish provided.

$m_D$ = g[1]

(ii)

Place the ball in the dish and record the combined mass $m_C$ of the dish and the ball.

$m_C$ = g[1]

(iii)

Calculate the mass $m_B$ of the ball. Show your working.

$m_B$ = g[1]

(d)

Calculate the density $\rho$ of the ball using the equation:

$$\rho = \frac{m_B}{V}$$

Give your answer to a suitable number of significant figures for this experiment.

$\rho$ = g/ cm$^{3}$[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • Place the blocks against opposite sides of the ball.
  • Measure the gap between the blocks above the ball and again below it; both gaps give its diameter.

1(a)(ii)

  • Measure the gap between the blocks twice, turning the ball between readings. Record each reading to the nearest millimetre.
  • For example, readings could be $\mathbf{4.0}\,\mathrm{cm}$ and $\mathbf{4.2}\,\mathrm{cm}$. Use your own measurements.

1(a)(iii)

  • Use $d = (d_1 + d_2)/2$ to find the mean diameter.
  • For example, $d = (4.0\,\mathrm{cm} + 4.2\,\mathrm{cm})/2 = \mathbf{4.1}\,\mathrm{cm}$. Use your own readings.

1(b)

  • Use $V = 0.52d^3$.
  • For example, if $d = 4.1\,\mathrm{cm}$, then $V = 0.52(4.1\,\mathrm{cm})^3 = \mathbf{36}\,\mathrm{cm^3}$ to 2 significant figures. Use your own diameter.

1(c)(i)

  • Read the balance with the empty dish on it. For example, $m_D = \mathbf{50}\,\mathrm{g}$; use your own reading.

1(c)(ii)

  • Read the balance with the dish and ball together. For example, $m_C = \mathbf{100}\,\mathrm{g}$; use your own reading, which should be greater than the dish mass.

1(c)(iii)

  • Use $m_B = m_C - m_D$ to remove the mass of the dish.
  • For example, $m_B = 100\,\mathrm{g} - 50\,\mathrm{g} = \mathbf{50}\,\mathrm{g}$. Use your own readings.

1(d)

  • Use $\rho = m_B/V$.
  • For example, $\rho = 50\,\mathrm{g}/36\,\mathrm{cm^3} = \mathbf{1.4}\,\mathrm{g/cm^3}$ to 2 significant figures. Use your own mass and volume.
Original question

Log in or create account

IGCSE, A-Level & AP