Skip to content

IGCSE Physics · June 2024 · Paper 61 · Difficulty 3 · Standard

Question 2

2

A student investigates the resistance of a wire.

Fig. 2.1 shows the circuit used.

(a)

The student measures the current $I$ in the circuit.

She places the sliding contact S at a distance $d = 50.0\text{ cm}$ from B.

She measures the potential difference (p.d.) $V_{50}$ across length $d$ of the resistance wire.

Fig. 2.2 shows the ammeter and voltmeter.

(i)

Record the readings on the ammeter and voltmeter. Include the units.

$I =$

$V_{50} =$ [2]

(ii)

Calculate the resistance $R_{50}$ of $50.0\text{ cm}$ of the resistance wire using the equation

$$R_{50} = \frac{V_{50}}{I}.$$

Include the unit.

$R_{50} =$ [2]

(iii)

Calculate $r_1$, a value for the resistance per $\text{cm}$ of the resistance wire, using the equation

$$r_1 = \frac{R_{50}}{d},$$

where

$d = 50.0\text{ cm}$

. Include the unit.

$r_1 =$ [2]

(b)

The student repeats the procedure in (a) using $d = 75.0\text{ cm}$ and calculates $r_2$ using the equation

$$r_2 = \frac{R_{75}}{d}.$$

$V_{75} =$ $2.2$

$R_{75} =$ $6.1$

$r_2 =$ $0.081$

A student suggests that the resistance per $\text{cm}$ of the resistance wire is constant.

(i)

State whether your results support this suggestion and justify your statement by reference to the results.

statement

justification

[2]

(ii)

The student plans to plot a graph of resistance $R$ against length $d$ to test the suggestion.

Suggest suitable additional values of length $d$ to use.

[2]

(c)

A variable resistor is a circuit component that can be made using a coil of resistance wire.

Draw the electrical symbol for a variable resistor.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • Read the current and potential difference from their scales: $I = \mathbf{0.36}\,\mathrm{A}$ and $V_{50} = \mathbf{1.4}\,\mathrm{V}$.

2(a)(ii)

  • Use $R_{50} = V_{50}/I$.
  • $R_{50} = 1.4\,\mathrm{V}/0.36\,\mathrm{A} = \mathbf{3.9}\,\mathrm{\Omega}$.

2(a)(iii)

  • Use $r_1 = R_{50}/d$.
  • $r_1 = 3.9\,\mathrm{\Omega}/50.0\,\mathrm{cm} = \mathbf{0.078}\,\mathrm{\Omega/cm}$.

2(b)(i)

  • Yes, the results support the suggestion: $0.078\,\mathrm{\Omega/cm}$ and $0.081\,\mathrm{\Omega/cm}$ are close, allowing for experimental uncertainty.

2(b)(ii)

  • Use, for example, $\mathbf{25.0}\,\mathrm{cm}$, $\mathbf{60.0}\,\mathrm{cm}$ and $\mathbf{100.0}\,\mathrm{cm}$. These give more points across the length of the wire.

2(c)

  • Draw a resistor as a rectangle with a diagonal arrow through it, with a connecting wire at each end. The arrow shows that the resistance can be changed.
Original question

Log in or create account

IGCSE, A-Level & AP