Skip to content

IGCSE Physics · June 2024 · Paper 61 · Difficulty 3 · Standard

Question 1

1

A student investigates the stretching of a spring.

Fig. 1.1 shows the set-up.

(a)

The student measures, and records in Table 1.1, the unstretched length $l_0$ of the spring. He does not include the loops at the ends of the spring in the measurement. The value $l_0$ is the length of the spring when the load $L$ on the spring is $0.00\text{ N}$.

Describe one technique you would use to obtain an accurate value for $l_0$. Draw a diagram to illustrate your answer.[2]

(b)

The student suspends a load $L = 1.00\text{ N}$ from the spring. He records the new length $l$ of the spring in Table 1.1.

He calculates the extension $e$ of the spring using the equation $e = (l - l_0)$ and records the value of $e$ in Table 1.1.

The student repeats the procedure using loads $L = 2.00\text{ N}$, $3.00\text{ N}$, $4.00\text{ N}$ and $5.00\text{ N}$.

The readings and results are recorded in Table 1.1.

Calculate the extension $e$ of the spring using the equation $e = (l - l_0)$ when $L = 5.00\text{ N}$. Record this value of $e$ in Table 1.1.

Table 1.1

$L/\text{N}$$l/\text{cm}$$e/\text{cm}$
0.002.10.0
1.006.03.9
2.0010.68.5
3.0014.912.8
4.0019.317.2
5.0023.7

[1]

(c)

Plot a graph of $L/\text{N}$ ($y$-axis) against $e/\text{cm}$ ($x$-axis). Start both axes at the origin $(0,0)$. Draw the best-fit line.

[4]

(d)

Determine the gradient $G$ of the graph. Show all your working and indicate on the graph the values you use.

$G =$ [2]

(e)

$G$ is numerically equal to the spring constant $k$.

Record the value of $k$ to a suitable number of significant figures for this experiment. Include the unit.

$k =$ [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Place a ruler close to the spring. Use a set square to line up each end of the coils with the scale. Read at right angles to avoid parallax; exclude the end loops.
  • Draw the spring beside the vertical ruler, with one edge of the set square along the ruler and its perpendicular edge level with an end of the coils.

1(b)

  • Use $e = l - l_0$.
  • $e = 23.7\,\mathrm{cm} - 2.1\,\mathrm{cm} = \mathbf{21.6}\,\mathrm{cm}$.

1(c)

  • Label the horizontal axis $e/\mathrm{cm}$ and the vertical axis $L/\mathrm{N}$. Start both at zero and choose scales that use at least half the grid.
  • Plot $(e,L)$ as $(0,0)$, $(3.9,1.00)$, $(8.5,2.00)$, $(12.8,3.00)$, $(17.2,4.00)$ and $(21.6,5.00)$, using the labelled units. Plot each point within half a small square.
  • Draw a thin straight line of best fit, with points balanced on either side.

1(d)

  • Use $G = \Delta L/\Delta e$. Draw a large triangle on the best-fit line, using at least half the distance between the extreme points.
  • For example, using points near $(0\,\mathrm{cm},0\,\mathrm{N})$ and $(21.6\,\mathrm{cm},5.0\,\mathrm{N})$, $G = 5.0\,\mathrm{N}/21.6\,\mathrm{cm} \approx \mathbf{0.23}\,\mathrm{N/cm}$. Use points on your own line.

1(e)

  • The spring constant is numerically equal to the gradient: $k = G$.
  • For $G \approx 0.23\,\mathrm{N/cm}$, $k = \mathbf{0.23}\,\mathrm{N/cm}$, to two significant figures.
Original question

Log in or create account

IGCSE, A-Level & AP