Skip to content

IGCSE Physics · June 2022 · Paper 61 · Difficulty 3 · Standard

Question 3

3

A student investigates the resistance of a wire.

Fig. 3.1 shows the circuit he uses.

(a)

The student measures the current and decides that he wants to use a lower current.

He adds a variable resistor to the circuit to reduce the current.

On Fig. 3.1, mark with an X a suitable position in the circuit for the variable resistor.[1]

(b)

The student measures the current $I$ in the circuit.

Record the current shown in Fig. 3.2.

$I =$ [1]

Fig. 3.2      Fig. 3.3

(c)

The student places the sliding contact at a distance $l = 85.0\text{ cm}$ from B.

He measures, and records in Table 3.1, the potential difference (p.d.) $V$ across the length $l$ of resistance wire BC.

Record, in Table 3.1, the potential difference shown in Fig. 3.3.[1]

(d)

The student repeats the procedure using $l$ values of $65.0\text{ cm}$, $45.0\text{ cm}$, $25.0\text{ cm}$ and $5.0\text{ cm}$. His readings are shown in Table 3.1.

(i)

Calculate, and record in Table 3.1, the resistance $R$ of $85.0\text{ cm}$ of the resistance wire using the equation

$$R = \frac{V}{I}$$

[1]

(ii)

Complete the column headings in Table 3.1.

Table 3.1

$l / \text{cm}$$V /$$R /$
$5.0$$0.2$$0.53$
$25.0$$0.8$$2.11$
$45.0$$1.4$$3.68$
$65.0$$2.0$$5.26$
$85.0$

[1]

(e)

Plot a graph of resistance $R$ ($y$-axis) against length $l$ ($x$-axis). Start both axes at the origin $(0,0)$.

[4]

(f)

Use your graph to determine the resistance $R_{50}$ of $50.0\text{ cm}$ of the resistance wire.

Show clearly on the graph how you obtained the necessary information.

$R_{50} =$ [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Mark a position in series with the power supply, ammeter and wire BC, so the resistor reduces the current through them.

3(b)

  • Read the ammeter: $I=\mathbf{0.38}\,\mathrm{A}$.

3(c)

  • Read the voltmeter: $V=\mathbf{2.6}\,\mathrm{V}$.

3(d)(i)

  • Use $R=V/I$.
  • $R=2.6\,\mathrm{V}/0.38\,\mathrm{A}=\mathbf{6.84}\,\Omega$.

3(d)(ii)

  • Label the columns $V/\mathrm{V}$ and $R/\Omega$.

3(e)

  • Label the horizontal axis $l/\mathrm{cm}$ and the vertical axis $R/\Omega$. Start both at zero and choose even scales.
  • Plot $(5.0,0.53)$, $(25.0,2.11)$, $(45.0,3.68)$, $(65.0,5.26)$ and $(85.0,6.84)$.
  • Draw a thin, continuous line of best fit through the points.

3(f)

  • From $50.0\,\mathrm{cm}$ on the horizontal axis, go up to the best-fit line and across to the resistance axis.
  • The reading is about $R_{50}=\mathbf{4.1}\,\Omega$; use the value from your own line.
Original question

Log in or create account

IGCSE, A-Level & AP