Skip to content

IGCSE Physics · June 2021 · Paper 63 · Difficulty 4 · Challenging

Question 2

2

A student determines the electromotive force (e.m.f.) and resistance of a cell by using a resistance wire.

She uses the circuit shown in Fig. 2.1.

Fig. 2.1
(a)

On Fig. 2.1, draw a voltmeter connected to measure the potential difference (p.d.) across terminals P and Q.[1]

(b)

The switch is closed. The student moves the crocodile clip on the resistance wire so that the potential difference $V$ across terminals P and Q is 5.0V.

She measures the current $I$ for the cell and resistor in series.

Fig. 2.2

Read, and record in Table 2.1, the value of $I$ shown on the meter in Fig. 2.2.[1]

(c)

The student repeats the procedure in (b) for values of $V = 4.5V, 4.0V, 3.5V$ and $3.0V$. Her readings are shown in Table 2.1.

Table 2.1

V/VI/A
5.0
4.50.56
4.00.44
3.50.35
3.00.28

Plot a graph of $I/A$ (y-axis) against $V/V$ (x-axis). Start both axes at the origin (0,0).[4]

(d)

The e.m.f. $E$ of the cell is equal to the value of $V$ when $I = 0.0A$.

Determine the value of $E$ from the graph.

$E$ = [1]

(e)
(i)

Determine the gradient $G$ of the graph. Show clearly on the graph how you obtained the necessary information.

$G$ = [1]

(ii)

The value of $\frac{1}{G}$ is numerically equal to the resistance $(r + R)$ where $r$ is the resistance of the cell and $R = 4.0\Omega$.

Calculate the resistance $r$ of the cell.

$r$ = \Omega[1]

(f)

Suggest how the experiment and graph could be improved to obtain a more accurate value for e.m.f. $E$.[2]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Draw a voltmeter symbol connected across $P$ and $Q$, in parallel with the cell and resistor.

2(b)

  • Read the ammeter scale: $I = \mathbf{0.64}\,\mathrm{A}$.

2(c)

  • Label the horizontal axis $V/\mathrm{V}$ and the vertical axis $I/\mathrm{A}$. Start both at zero and use scales that fill at least half the grid.
  • Plot $(5.0, 0.64)$, $(4.5, 0.56)$, $(4.0, 0.44)$, $(3.5, 0.35)$ and $(3.0, 0.28)$.
  • Draw a thin, well-judged best-fit straight line.

2(d)

  • Extend the best-fit line to the voltage axis, where $I = 0$. Read $E \approx \mathbf{1.6}\,\mathrm{V}$.

2(e)(i)

  • Draw a large triangle on the best-fit line. Use $G = \Delta I/\Delta V$.
  • For example, $G \approx (0.65-0.28)\,\mathrm{A}/(5.0-3.0)\,\mathrm{V} = \mathbf{0.185}\,\mathrm{A/V}$.

2(e)(ii)

  • Use $r = 1/G-R$.
  • $r = 1/(0.185\,\mathrm{A/V})-4.0\,\mathrm{\Omega} = \mathbf{1.4}\,\mathrm{\Omega}$.

2(f)

  • Take more readings at other potential differences to define the line more accurately.
  • Start the voltage axis at $3.0\,\mathrm{V}$ to expand the scale and make the plotted trend clearer.
Original question

Log in or create account

IGCSE, A-Level & AP