Skip to content

IGCSE Physics · June 2021 · Paper 61 · Difficulty 3 · Standard

Question 2

2

A student investigates resistance.

Fig. 2.1 shows the circuit she uses.

(a)

She records the potential difference (p.d.) $V_1$ across the resistor and the current $I_1$ in the circuit.

The meters are shown in Fig. 2.2 and Fig. 2.3.

(i)

Write down the readings. Include the units for potential difference, current or resistance where appropriate in all parts of the question.

$V_1 =$

$I_1 =$ [3]

(ii)

Calculate the resistance $R_1$ of the resistor using the equation $R_1 = \frac{V_1}{I_1}$.

$R_1 =$ [1]

(b)

She connects a second resistor in series with the first resistor. She connects the voltmeter across both resistors and records the potential difference $V_2$ across both resistors and the current $I_2$ in the circuit.

$V_2 =$ 2.6

$I_2 =$ 0.28

Calculate the resistance $R_{\text{S}}$ of the resistors in series using the equation $R_{\text{S}} = \frac{V_2}{I_2}$.

$R_{\text{S}} =$ [1]

(c)

She connects the second resistor in parallel with the first resistor. She connects the voltmeter across both resistors. She records the potential difference $V_3$ across the resistors and the current $I_3$ in the circuit.

$V_3 =$ 2.4

$I_3 =$ 0.99

Calculate the resistance $R_{\text{P}}$ of the resistors in parallel using the equation $R_{\text{P}} = \frac{V_3}{I_3}$. Give your answer to a suitable number of significant figures for this experiment.

$R_{\text{P}} =$ [1]

(d)

Complete the circuit diagram to show the circuit she uses in part (c).

[2]

(e)

Describe how to extend part (c) of this experiment to investigate the relationship between the combined resistance of identical resistors connected in parallel and the number of resistors.[2]

(f)

In this type of electrical experiment, a variable resistor can be used to vary the current.

Draw the circuit symbol for a variable resistor.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)(i)

  • The voltmeter reads $V_1 = \mathbf{2.4}\,\mathrm{V}$ and the ammeter reads $I_1 = \mathbf{0.50}\,\mathrm{A}$.

2(a)(ii)

  • Use $R_1 = V_1/I_1$.
  • $R_1 = 2.4\,\mathrm{V}/0.50\,\mathrm{A} = \mathbf{4.8}\,\mathrm{\Omega}$.

2(b)

  • Use $R_S = V_2/I_2$.
  • $R_S = 2.6\,\mathrm{V}/0.28\,\mathrm{A} = \mathbf{9.3}\,\mathrm{\Omega}$ to two significant figures.

2(c)

  • Use $R_P = V_3/I_3$.
  • $R_P = 2.4\,\mathrm{V}/0.99\,\mathrm{A} = \mathbf{2.42}\,\mathrm{\Omega}$.

2(d)

  • Draw the two resistors on separate parallel branches. Connect the voltmeter across both branches and the ammeter in series with the supply, using the correct circuit symbols.

2(e)

  • Add another identical resistor in parallel, measure the voltage and total current, and calculate the combined resistance.
  • Add at least three more identical resistors in parallel, one at a time. Repeat the measurements and calculation after each addition.

2(f)

  • Draw the resistor symbol as a rectangle with a diagonal arrow through it. The arrow shows that the resistance can be varied.
Original question

Log in or create account

IGCSE, A-Level & AP