Skip to content

IGCSE Physics · June 2021 · Paper 51 · Difficulty 4 · Challenging

Question 4

4

A student investigates the rate of cooling, in air, of heated blocks made of different metals. The temperature of each block is increased by placing it in hot water.

Plan an experiment to investigate how the rate of cooling depends on the metal from which each block is made.

You are not required to carry out this experiment.

The following apparatus is available to the student:

cylindrical blocks of different metals, each with a hole for a thermometer, as shown in Fig. 4.1 a thermometer.

Other apparatus normally available in a school laboratory can also be used.

In your plan, you should:

  • list any additional apparatus required
  • explain briefly how you would carry out the investigation, including the measurements you would take
  • state the key variables to be kept constant
  • draw a suitable table, with column headings, to show how you would display your readings (you are not required to enter any readings in the table)
  • explain how you would use the results to reach a conclusion.
Fig. 4.1

[7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

  • Use a timer and a hot-water bath. Heat a block in the water, remove it and place a thermometer in its hole.
  • Record its temperature at regular times as it cools. Repeat for each metal, keeping the starting temperature, block size and room temperature the same.
  • Make a table with headings: metal; time $t/\mathrm{s}$; temperature $\theta/{}^\circ\mathrm{C}$.
  • Plot temperature against time for each metal. Over the same time from the same starting temperature, the metal with the greatest temperature drop has the fastest cooling rate.
Original question

Log in or create account

IGCSE, A-Level & AP