Skip to content

IGCSE Physics · June 2020 · Paper 62 · Difficulty 3 · Standard

Question 2

2

A student determines the resistance of a resistance wire.

Fig. 2.1 shows the circuit he uses.

Fig. 2.1
(a)
  • The student places the sliding contact C on the resistance wire at a distance $l = 10.0\text{ cm}$ from B.
  • Record, in the first row of Table 2.1, the potential difference $V$ across the length $l = 10.0\text{ cm}$ of resistance wire, as shown on the voltmeter in Fig. 2.2.
Fig. 2.2
Fig. 2.3
  • Record, in the first row of Table 2.1, the current $I$ in the circuit as shown in Fig. 2.3.
  • Complete the column headings in Table 2.1.

Table 2.1

$l/$$V/$$I/$
10.0
30.00.70.30
50.01.10.27
70.01.50.28
90.02.10.29

[3]

(b)

The student repeats the procedure using $l = 30.0\text{ cm}$, $50.0\text{ cm}$, $70.0\text{ cm}$ and $90.0\text{ cm}$. The readings are shown in Table 2.1.

Plot a graph of $V/\text{V}$ ($y$-axis) against $l/\text{cm}$ ($x$-axis). Start both axes at the origin $(0,0)$.

[4]

(c)
(i)

Write a conclusion about the value of the current $I$ in the circuit as the position of the sliding contact C is changed.[1]

(ii)

Justify your conclusion by reference to your results.[1]

(d)

Using the graph, determine the potential difference $V_L$ when the length $l = 60.0\text{ cm}$.

Show clearly on the graph how you obtained your result.

$V_L = \text{.....................................................}$[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • The readings are $V = \mathbf{0.2}\,\mathrm{V}$ and $I = \mathbf{0.28}\,\mathrm{A}$.
  • Label the columns $l/\mathrm{cm}$, $V/\mathrm{V}$ and $I/\mathrm{A}$.

2(b)

  • Put $l/\mathrm{cm}$ on the horizontal axis and $V/\mathrm{V}$ on the vertical axis. Start both at zero and choose scales that use most of the grid.
  • Plot $(10.0, 0.2)$, $(30.0, 0.7)$, $(50.0, 1.1)$, $(70.0, 1.5)$ and $(90.0, 2.1)$, then draw a thin, continuous best-fit line.

2(c)(i)

  • The current is approximately constant as the contact moves.

2(c)(ii)

  • The readings are all close: they range from $0.27\,\mathrm{A}$ to $0.30\,\mathrm{A}$.

2(d)

  • Find $60.0\,\mathrm{cm}$ on the horizontal axis. Draw a vertical line to the best-fit line, then a horizontal line to the voltage axis.
  • Read approximately $V_L = \mathbf{1.3}\,\mathrm{V}$; the exact reading depends on your line.
Original question

Log in or create account

IGCSE, A-Level & AP