Skip to content

IGCSE Physics · June 2020 · Paper 62 · Difficulty 4 · Challenging

Question 1

1

A student investigates the period of a pendulum. Fig. 1.1 and Fig. 1.2 show the apparatus she uses.

Fig. 1.1 Fig. 1.2

(a)

Explain briefly, with the help of a diagram, how you would use a metre rule and set square to measure the length $d$ of a pendulum as accurately as possible.

Diagram:[3]

(b)

The student adjusts the pendulum so that $d = 50.0\text{ cm}$. She displaces the bob slightly and releases it so that it swings. Fig. 1.2 shows one complete oscillation of the pendulum.

She measures the time $t_1$ for 20 complete oscillations.

(i)

Record the time $t_1$ shown in Fig. 1.3.

$t_1 =$ [1]

(ii)

Calculate the period $T_1$ of the pendulum. The period is the time for one complete oscillation.

$T_1 =$ [1]

(c)

The student adjusts the pendulum until the distance $d$ is $100.0\text{ cm}$.

She repeats the procedure and records the time $t_2$ for 20 oscillations and the period $T_2$.

$t_2 =$ 39.80 s

$T_2 =$ 1.99 s

She measures the mass $m_{\text{A}}$ of the pendulum bob. The reading on the balance is shown in Fig. 1.4.

Record mass $m_{\text{A}}$ of the pendulum bob to the nearest gram.

$m_{\text{A}} =$ g[1]

The student repeats the procedure using a pendulum bob of mass $m_{\text{B}}$.

$m_{\text{B}} = 109$ g

She obtains these results:

distance $d = 50.0$ cm

period $T_3 = 1.39$ s

distance $d = 100.0$ cm

period $T_4 = 2.02$ s

(d)
(i)

Using the results $T_1$, $T_2$, $T_3$ and $T_4$, for the period of each of the pendulums, tick (✓) the response that matches your results within the limits of experimental accuracy.

the period $T$ is affected by $d$ only

the period $T$ is affected by both $d$ and $m$

the period $T$ is affected by $m$ only

the period $T$ is not affected by $d$ or $m$[1]

(ii)

Justify your answer to (d)(i) by reference to the results.[1]

(e)

The student now investigates the effect of the size of the oscillations on the period of the pendulum.

(i)

Suggest briefly how you would measure the size of an oscillation. You may draw a diagram.[2]

(ii)

State one variable that you would keep constant during this part of the investigation.[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Place the metre rule vertically with its zero at the bottom of the clamp.
  • Hold a set square horizontally from the centre of the bob to the rule. Draw this arrangement in the diagram.
  • Read the rule at eye level, looking perpendicular to the scale, to avoid parallax.

1(b)(i)

  • The stopwatch reads $\mathbf{28.12}\,\mathrm{s}$.

1(b)(ii)

  • Use period $T_1 = t_1/20$ for 20 oscillations.
  • $T_1 = 28.12\,\mathrm{s}/20 = \mathbf{1.406}\,\mathrm{s}$.

1(c)

  • The balance reads $\mathbf{52}\,\mathrm{g}$ to the nearest gram.

1(d)(i)

  • Tick: the period is affected by length only. At each length, changing the mass gives nearly the same period, but increasing the length increases the period.

1(d)(ii)

  • At the same length, the periods for the two masses are close: $1.406\,\mathrm{s}$ and $1.39\,\mathrm{s}$ at $50.0\,\mathrm{cm}$. Increasing the length to $100.0\,\mathrm{cm}$ makes the period about $2\,\mathrm{s}$.

1(e)(i)

  • Place a protractor at the pivot and measure the angle between the vertical and the string at its greatest displacement.

1(e)(ii)

  • Keep the length of the pendulum constant.
Original question

Log in or create account

IGCSE, A-Level & AP