Skip to content

IGCSE Physics · June 2020 · Paper 31 · Difficulty 2 · Core

Question 6

6

Fig. 6.1 shows a liquid-in-glass thermometer.

Fig. 6.1
(a)
(i)

This thermometer is used for measuring temperatures in science experiments.

State the unit for measuring temperature.[1]

(ii)

On Fig. 6.1, an arrow points to the temperature reading when the thermometer is placed in pure melting ice. This is labelled ice point.

On Fig. 6.1, draw an arrow pointing to the temperature reading when the thermometer is at the upper fixed point. Label this arrow steam point.[1]

(b)

A liquid-in-glass thermometer uses the property of expansion of a liquid to measure temperature.

State one other application or consequence of thermal expansion.[1]

(c)

A student is testing how different surfaces absorb radiant heat.

The student puts two metal plates in holders and places them on either side of a radiant heater as shown in Fig. 6.2. One plate has a shiny metal side facing towards the heater and the other plate has a dull black side facing towards the heater.

A metal disc is attached to each plate using wax.

Fig. 6.2
(i)

The student turns on the radiant heater and starts a stop-clock. The wax on the plate with a dull black side melts and the metal disc falls off the plate 53 seconds after the stop-clock is started.

The metal disc on the plate with a shiny metal side remains attached for another 32 seconds after the metal disc on the first plate falls.

Explain why the metal disc on the plate with a dull black side falls before the metal disc on the plate with a shiny metal side.[2]

(ii)

Another student observes the experiment shown in Fig. 6.2 and says that the comparison of the two plates is not fair.

Suggest why the experiment is not fair.[2]

[Total: 7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

6(a)(i)

  • The unit is degrees Celsius, $\mathrm{°C}$.

6(a)(ii)

  • Draw the arrow at $\mathbf{100}\,\mathrm{°C}$ and label it steam point.

6(b)

  • Gaps are left between railway tracks so the rails can expand when heated.

6(c)(i)

  • The dull black surface absorbs thermal radiation better than the shiny surface.
  • The wax on the black plate heats up faster and melts first.

6(c)(ii)

  • For a fair comparison, other conditions must be kept the same.
  • The plates are at different distances from the heater, so they receive different amounts of radiation.
Original question

Log in or create account

IGCSE, A-Level & AP