Skip to content

IGCSE Physics · March 2022 · Paper 62 · Difficulty 4 · Challenging

Question 4

4

A student investigates the heating of water using an immersion heater.

An immersion heater is an electrical heater that can be placed directly into water.

Plan an experiment to investigate how one factor affects the rate at which the temperature of the water rises when heated using an immersion heater.

The apparatus available includes:

  • an immersion heater
  • equipment to connect the circuit, part of which is shown in Fig. 4.1
  • a stop-clock
  • a beaker to contain the water.

In your plan, you should:

  • state the one factor which you have chosen and list any additional apparatus needed to measure the factor
  • complete the circuit diagram in Fig. 4.1
  • explain how to do the experiment, including any precautions to ensure reliable results
  • state the key variables to be kept constant
  • draw a table, or tables, with column headings, to show how to display the readings (you are not required to enter any readings in the table)
  • explain how to use the readings to reach a conclusion.
Fig. 4.1

[7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

  • Choose current as the factor. Add an ammeter in series with the heater and variable resistor, and use a thermometer and measuring cylinder.
  • Measure the water volume and initial temperature. Set and record the current, heat for a measured time, then record the final temperature. Repeat for at least five currents.
  • Keep the water volume and initial temperature constant. Repeat each reading and average it. Use columns for current $I/\mathrm{A}$, time $t/\mathrm{s}$ and temperatures $\theta/{}^\circ\mathrm{C}$.
  • Calculate $R = (\theta_{\mathrm{final}}-\theta_{\mathrm{initial}})/t$ for each current. Plot $R$ in $^\circ\mathrm{C/s}$ against $I$ in $\mathrm{A}$ to see how current affects the rate.
Original question

Log in or create account

IGCSE, A-Level & AP