A student investigates an electric circuit to find the resistance of an unknown resistor Z.
The student sets up the incomplete circuit shown in Fig. 2.1. There is a gap between the points labelled X and Y.

The student:
- closes the switch
- records the voltmeter reading $V_0$
- opens the switch.
The reading on the voltmeter is shown in Fig. 2.2. Record the voltmeter reading $V_0$.

$V_0 =$ V[1]
The student:
- connects a $10\,\Omega$ resistor between points X and Y
- closes the switch
- records, in Table 2.1, the reading $V$ on the voltmeter
- opens the switch
- repeats this procedure for resistors of resistances $R = 22\,\Omega$, $39\,\Omega$, $47\,\Omega$ and $68\,\Omega$.
Table 2.1
| resistance $R / \Omega$ | voltmeter reading $V / \text{V}$ | current $I / \text{A}$ |
| 10 | 1.35 | |
| 22 | 2.20 | 0.10 |
| 39 | 2.85 | 0.073 |
| 47 | 0.064 | |
| 68 | 3.37 | 0.050 |
Use the voltmeter reading in Table 2.1 when the $10\,\Omega$ resistor is connected between X and Y to calculate the current $I$ in the circuit. Use the equation:
Record your value of
$I$in Table 2.1 to 2 significant figures.[2]
The voltmeter reading $V$ for the $47\,\Omega$ resistor is missing. Calculate $V$.
$V =$ V
Add your answer to Table 2.1.[1]
Plot a graph of $V / \text{V}$ ($y$-axis) against $I / \text{A}$ ($x$-axis). Start your axes at the origin $(0,0)$.
Draw a best-fit straight line.

[4]
Determine the gradient $G$ of your line. Show all working and indicate on the graph the values you use.
$G =$ [2]
The gradient of your line is numerically equal to the resistance $R_Z$ of the unknown resistor Z.
Write down the value of the resistance $R_Z$.
Record your answer to the nearest ohm.
$R_Z =$ $\Omega$[1]
[Total: 11]