Skip to content

IGCSE Physics · November 2025 · Paper 61 · Difficulty 2 · Core

Question 2

2

A student investigates the resistance of a wire.

Fig. 2.1 shows the circuit he uses.

Fig. 2.1
(a)

Record the ammeter reading shown in Fig. 2.2.

Fig. 2.2

$I =$ $\text{A}$[1]

(b)

The student places the sliding contact $15.0\text{ cm}$ from $\text{B}$.

He measures the potential difference (p.d.) $V$ across the length $d = 15.0\text{ cm}$ of resistance wire $\text{BC}$.

He repeats the procedure using values of $d = 40.0\text{ cm}$, $d = 60.0\text{ cm}$ and $d = 80.0\text{ cm}$.

The values of $d$, $V$ and $R$ are shown in Table 2.1.

The voltmeter reading he obtains when $d = 100.0\text{ cm}$ is shown in Fig. 2.3.

(i)

Record, in the last row of Table 2.1, the voltmeter reading shown in Fig. 2.3.[1]

Fig. 2.3
(ii)

Calculate the resistance $R$ of $100.0\text{ cm}$ of the resistance wire, using the equation

$$R = \frac{V}{I}.$$

Record

$R$

in the last row of Table 2.1.[1]

(iii)

Complete the column headings in Table 2.1.[1]

Table 2.1

$d/$$V/$$R/$
$15.0$$0.4$$1.25$
$40.0$$1.1$$3.44$
$60.0$$1.4$$4.38$
$80.0$$2.1$$6.56$
$100.0$
(c)

Plot a graph of resistance $R/\Omega$ ($y$-axis) against length $d/\text{cm}$ ($x$-axis). Draw a best-fit line.

[4]

(d)

Use your graph to determine the resistance $R_{75}$ of a length $d = 75.0\text{ cm}$ of the resistance wire. Show clearly on the graph how you obtained the value.

$R_{75} =$ [3]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Read the ammeter scale at the pointer: $I = \mathbf{0.32}\,\mathrm{A}$.

2(b)(i)

  • Read the voltmeter scale at the pointer: $V = \mathbf{2.5}\,\mathrm{V}$.

2(b)(ii)

  • Use $R = V/I$.
  • $R = 2.5\,\mathrm{V}/0.32\,\mathrm{A} = \mathbf{7.81}\,\Omega$.

2(b)(iii)

  • The column headings are $d\,/\,\mathbf{\mathrm{cm}}$, $V\,/\,\mathbf{\mathrm{V}}$ and $R\,/\,\mathbf{\Omega}$.

2(c)

  • Label the horizontal axis $d\,/\,\mathrm{cm}$ and the vertical axis $R\,/\,\Omega$. Choose even scales that make good use of the grid.
  • Plot $(15.0,1.25)$, $(40.0,3.44)$, $(60.0,4.38)$, $(80.0,6.56)$ and $(100.0,7.81)$, then draw a thin, continuous best-fit line.

2(d)

  • On the best-fit graph, go up from $75.0\,\mathrm{cm}$ to the line, then across to the resistance axis.
  • A suitable reading is about $\mathbf{6.0}\,\Omega$; the exact value depends on the line drawn.
Original question

Log in or create account

IGCSE, A-Level & AP