Skip to content

IGCSE Physics · November 2025 · Paper 61 · Difficulty 4 · Challenging

Question 3

3

A student investigates the refraction of light in the material of a transparent block.

Fig. 3.1 shows the ray-trace sheet. The student places a transparent block on the sheet and labels the block ABCD.

Fig. 3.1
(a)

On Fig. 3.1, draw a normal NL to the side AB of the transparent block at a distance 2.0 cm from A. Continue the normal so that it passes through side CD of the block.

Label the point S where NL crosses AB.[2]

(b)

• Draw a line RS at an angle $i = 30^{\circ}$ to the normal, above AB and to the left of the normal.

  • The student places two pins $P_1$ and $P_2$ on line RS. Mark, with two crosses (X), on line RS, positions of the pins at a suitable distance apart for this experiment. [2]

(c)

The student looks from the position of the eye shown in Fig. 3.1, to observe the images of $P_1$ and $P_2$ through side CD of the block. He adjusts his line of sight until the images of $P_1$ and $P_2$ appear exactly one behind the other.

He places two pins $P_3$ and $P_4$ between side CD of the block and his eye so that $P_3$, $P_4$ and the images of $P_1$ and $P_2$ seen through the block, appear exactly one behind the other.

The positions of $P_3$ and $P_4$ are shown on Fig. 3.1.

  • Draw a line through the positions of $P_3$ and $P_4$. Continue the line until it meets the normal NL and label that point E.
  • Label the other end of the line F.
  • Measure the acute angle $\theta$ between EF and the normal. An acute angle is an angle less than 90°.

angle $\theta$ = [2]

(d)
(i)

Tick one box to complete the sentence.

To produce the most accurate ray-trace, a student places the pins $P_1$ and $P_2$

exactly 5.0 cm apart.

less than 5.0 cm apart.

more than 5.0 cm apart.[1]

(ii)

Suggest two other techniques that the student can use to produce an accurate ray-trace.

  1. [2]
(e)

The student plans to investigate the relationship between angle $i$ and angle $\theta$. The student takes more sets of readings to test the relationship. List suitable values of angle $i$ that the student can use.

[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Mark $S$ on $AB$, $2.0\,\mathrm{cm}$ from $A$.
  • Draw $NL$ through $S$ at $\mathbf{90^\circ}$ to $AB$ and continue it through $CD$.

3(b)

  • Draw $RS$ above $AB$, to the left of the normal, at $\mathbf{30^\circ}$ to it.
  • Mark $P_1$ and $P_2$ on the line at least $5.0\,\mathrm{cm}$ apart for accurate alignment.

3(c)

  • Draw a single neat line through $P_3$ and $P_4$ and extend it to meet the normal at $E$; label its other end $F$.
  • Measure the acute angle between $EF$ and the normal: $\theta = \mathbf{32^\circ}$.

3(d)(i)

  • Choose \textbf{more than $5.0\,\mathrm{cm}$ apart}; greater separation helps align the pins accurately.

3(d)(ii)

  • Use a sharp pencil to draw thin lines, so their positions are clear.
  • Keep the pins vertical so that their apparent alignment is reliable.

3(e)

  • Use, for example, $\mathbf{10^\circ}$, $\mathbf{20^\circ}$, $\mathbf{40^\circ}$, $\mathbf{50^\circ}$ and $\mathbf{60^\circ}$. These provide several readings across a wide range.
Original question

Log in or create account

IGCSE, A-Level & AP