Skip to content

IGCSE Physics · November 2025 · Paper 43 · Difficulty 4 · Challenging

Question 4

4
(a)
(i)

A rectangular glass tank contains $3.0\text{ m}^3$ of liquid. The mass of the liquid is $2800\text{ kg}$. Calculate the density of the liquid.

density = [1]

(ii)

A metal block is placed in the tank and it sinks to the bottom. The top surface of the block is $1.1\text{ m}$ below the surface of the liquid.

Fig. 4.1 shows the block on the bottom of the tank.

Calculate the force exerted by the liquid on the top of the block.

force on top of the block = [4]

(b)

Fig. 4.2 shows part of a steel railway track. There are small gaps between sections of the rail.

State why gaps are needed between the sections of rail. Explain your answer in terms of particles.

statement

explanation [2]

(c)

Fig. 4.3 shows a saucepan of boiling water on the heating ring of an electric cooker.

The handle is made from plastic. Explain why this material is suitable.[2]

[Total: 9]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

4(a)(i)

  • Use $\rho = m/V$: $\rho = (2800\,\mathrm{kg})/(3.0\,\mathrm{m^3}) = \mathbf{930}\,\mathrm{kg/m^3}$ to two significant figures.

4(a)(ii)

  • Use liquid pressure $p = \rho gh$, retaining the unrounded density $\rho = 933.3\,\mathrm{kg/m^3}$.
  • $p = (933.3\,\mathrm{kg/m^3})(9.8\,\mathrm{N/kg})(1.1\,\mathrm{m}) = 10061\,\mathrm{Pa}$.
  • The top area is $A = lw = (0.45\,\mathrm{m})(0.30\,\mathrm{m}) = 0.135\,\mathrm{m^2}$.
  • Use $F_{\mathrm{liquid}} = pA$: $F_{\mathrm{liquid}} = (10061\,\mathrm{Pa})(0.135\,\mathrm{m^2}) = \mathbf{1400}\,\mathrm{N}$ downwards, to two significant figures.

4(b)

  • Gaps allow thermal expansion, preventing the rails from buckling when hot.
  • Heating makes particles vibrate more strongly and increases their average separation, so each rail becomes longer.

4(c)

  • Plastic is a poor thermal conductor.
  • It reduces thermal energy transfer from the hot pan, so the handle does not become too hot to hold.
Original question

Log in or create account

IGCSE, A-Level & AP