Skip to content

IGCSE Physics · November 2025 · Paper 41 · Difficulty 3 · Standard

Question 4

4
(a)

A 12V, 50W immersion heater is used to heat 0.15kg of water in a beaker. The water is initially at a room temperature of 20°C. The specific heat capacity of water is 4200J/(kg°C).

Calculate the energy supplied to raise the temperature of the water from 20°C to 58°C.

energy = [3]

(b)

The immersion heater is removed from the beaker.

One metal rod and one plastic rod are placed in the beaker of hot water as shown in Fig. 4.1. The rods are at room temperature (20°C) before they are placed into the beaker.

Describe how the temperature of point X on each rod changes after the rods are placed in the beaker. Explain your answer.

[4]

[Total: 7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

4(a)

  • Use $\Delta E = mc\Delta\theta$ to calculate the energy needed to warm the water.
  • $\Delta\theta = 58-20 = 38\,\mathrm{^{\circ}C}$.
  • $\Delta E = (0.15\,\mathrm{kg})(4200\,\mathrm{J/(kg\,^{\circ}C)})(38\,\mathrm{^{\circ}C}) = \mathbf{24000}\,\mathrm{J}$ to two significant figures.

4(b)

  • Point X on the metal rod warms faster than point X on the plastic rod.
  • The temperature at X rises with time as energy reaches it from the hot water.
  • Thermal energy travels along each rod by conduction.
  • Metal has free electrons that carry energy along the rod; plastic has no free electrons, so it conducts much more slowly.
Original question

Log in or create account

IGCSE, A-Level & AP