Catalysts
مُقدَّم| English | المعنى |
|---|---|
| heterogeneous catalyst/ˌhetrəˈdʒiːnɪəs ˈkætəlɪst/ | عامل حفاز غير متجانس |
| adsorption/ədˈsɔːpʃn/ | الامتزاز |
| desorption/dɪˈsɔːpʃn/ | الانتزاز |
| surface area/ˈsɜːfɪs ˈeərɪə/ | مساحة السطح |
| homogeneous catalyst/həˈməʊdʒnɪəs ˈkætəlɪst/ | عامل حفاز متجانس |
Speeding things up, again
- About 90% of chemical products are made with a catalyst at some stage. A catalyst gives a different route with a lower activation energy and is unchanged at the end.
- Heterogeneous catalysts work on a surface; homogeneous ones take part in the reaction and are reformed.
A heterogeneous catalyst is in the same physical state as the reactants.
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
False. A heterogeneous catalyst is in a different state, e.g. a solid catalyst with gaseous reactants. A homogeneous catalyst is in the same state.
Heterogeneous catalysts 多相催化剂
- In a different physical state from the reactants (usually a solid with gases). It works in three stages:
- adsorption 吸附: reactant molecules stick to the surface.
- their bonds are weakened, so they react more easily.
- desorption 脱附: the products leave the surface.
- Examples: iron in the Haber process; Pt/Pd/Rh in a catalytic converter.

A heterogeneous catalyst works by adsorption, reaction, then desorption on its surface

Industrial heterogeneous catalysts are made as small shaped pellets, rings and discs to give a large surface area 表面积 for the reactants to stick to
How a catalyst speeds a reaction
Turn the catalyst on and watch the rate jump — it gives more successful collisions per second by offering a lower-energy path.
A heterogeneous catalyst:
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Heterogeneous = different state (e.g. solid + gases); reactants adsorb, react, then products desorb.
Put the stages of heterogeneous catalysis in order.
الصعوبة 3/5 · 200 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Reactants adsorb, their weakened bonds react, then the products desorb.
Strength of adsorption and poisoning
- Adsorption must be just right. Too weak (Ag): reactants do not stick. Too strong (W): products cannot leave. Pt, Pd, Rh and Ni sit in between.
- Poisoning: a substance such as lead or sulfur adsorbs strongly and blocks the active sites. Leaded petrol ruined catalytic converters, so cars with converters must use unleaded fuel.
Why must cars with catalytic converters use unleaded petrol?
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
This is catalyst poisoning: lead stays adsorbed, so reactant molecules can no longer reach the active sites.
Homogeneous catalysts 均相催化剂
- In the same physical state as the reactants.
- It is used up in one step and reformed in a later step, so it returns unchanged.
- Examples: NOₓ helping oxidise atmospheric $\text{SO}_2$; $\text{Fe}^{2+}/\text{Fe}^{3+}$ speeding the $\text{I}^-$ + $\text{S}_2\text{O}_8^{2-}$ reaction.
A homogeneous catalyst:
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Homogeneous = same state; it reacts in one step and is regenerated in a later step, so it returns unchanged.
Which is a homogeneous catalyst?
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Aqueous Fe²⁺/Fe³⁺ ions are in the same state as the reacting ions — homogeneous; solid Fe and Pt are heterogeneous.
Worked example: how iron ions catalyse a slow reaction
Peroxodisulfate oxidises iodide slowly: $\text{S}_2\text{O}_8^{2-} + 2\text{I}^- \rightarrow 2\text{SO}_4^{2-} + \text{I}_2$. A little $\text{Fe}^{2+}$ makes it fast.
- Uncatalysed, two negative ions must collide, and they repel, so the activation energy is high. With iron: $\text{S}_2\text{O}_8^{2-} + 2\text{Fe}^{2+} \rightarrow 2\text{SO}_4^{2-} + 2\text{Fe}^{3+}$, then $2\text{Fe}^{3+} + 2\text{I}^- \rightarrow 2\text{Fe}^{2+} + \text{I}_2$.
- Each step joins oppositely charged ions, so each has a lower activation energy. Adding the steps gives the overall equation and the $\text{Fe}^{2+}$ is reformed. $\text{Fe}^{3+}$ works too, because it simply enters at the second step.
Why is the uncatalysed reaction between $\text{S}_2\text{O}_8^{2-}$ و $\text{I}^-$ slow?
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Repulsion between two anions raises the activation energy; each catalysed step instead joins a cation with an anion.
Why are transition-metal ions such as Fe²⁺ good homogeneous catalysts?
الصعوبة 1/5 · 100 عملة + مكافأة صغيرة عند الإنجاز الأول اليوم
Fe²⁺ is oxidised to Fe³⁺ in one step and reduced back in the next, so it is reformed.
- A heterogeneous catalyst does not change the products or ΔH, only the route and $E_A$.
- A homogeneous catalyst is used in one step, but it is reformed later: overall it is not used up.
- Transition-metal ions are good homogeneous catalysts because they change oxidation state easily (Fe²⁺ ⇌ Fe³⁺).
You've got it
- heterogeneous (different state): adsorption → weakened bonds → desorption (e.g. Fe in Haber, Pt/Pd/Rh converter)
- homogeneous (same state): used up then reformed, so unchanged (e.g. $\text{Fe}^{2+}/\text{Fe}^{3+}$)