Topic 1: Energy
AQA · GCSE · Physics Topic 1 23:32 English narration · English and 中文 subtitles you can switch
Chapters
Transcript
Why it matters.
为什么这很重要。
In 1845 James Prescott Joule, the son of a brewer from Salford near Manchester, built a small copper tank of water with a paddle wheel inside.
1845 年,来自曼彻斯特附近索尔福德的一位酿酒商的儿子詹姆斯·普雷斯科特·焦耳建造了一个小铜水箱,里面装有一个桨轮。
Falling weights turned the paddles, and the churned water warmed by only a fraction of a degree, which Joule measured with a thermometer he could read to about one two-hundredth of a degree.
下落的重物带动桨轮转动,搅动的水只升温了不到一度,焦耳用一支读数精度约为二百分之一度的温度计测量了这一变化。
In June 1849 he reported to the Royal Society in London that the work done by a weight of 772 pounds falling one foot would warm one pound of water by one degree Fahrenheit.
1849 年 6 月,他向伦敦皇家学会报告,一个重 772 磅的物体下落一英尺所做的功,能使一磅水升高一华氏度。
Mechanical work and heating were two ways of moving the same thing.
机械做功和加热是传递同一种东西的两种方式。
That thing is energy, and the rule Joule helped to establish, that energy is never created or destroyed, is the most useful idea in physics.
这种东西就是能量,而焦耳帮助确立的能量既不会被创造也不会被消灭这一规律,是物理学中最有用的思想。
In this unit you will: AQA GCSE Physics (8463), topic 4.1 Energy, examined on Paper 1.
在本单元中,你将学习:AQA GCSE Physics(8463),主题 4.1 能量,在 Paper 1 中考查。
It includes required practical 1 (specific heat capacity) and, for GCSE Physics only, required practical 2 (thermal insulators).
它包括必做实验 1(比热容),以及仅限 GCSE Physics 的必做实验 2(隔热材料)。
Content marked (HT) is Higher tier only.
标有(HT)的内容仅限 Higher 层级。
The exam gives you a Physics Equations Sheet with some equations; the others in this unit you must learn.
考试会提供一张包含部分公式的 Physics Equations Sheet;本单元的其他公式你必须记住。
describe how energy is stored and transferred when a system changes; calculate kinetic, elastic potential and gravitational potential energy, and energy changes from heating; calculate power and efficiency, and explain how to reduce wasted energy; compare the energy resources used for transport, electricity and heating.
描述系统变化时能量如何储存和传递;计算动能、弹性势能和重力势能,以及加热引起的能量变化;计算功率和效率,并解释如何减少浪费的能量;比较用于交通、发电和供暖的能源。
A system is an object, or a group of objects, that you choose to study.
系统是你选择研究的一个物体或一组物体。
When a system changes, energy moves from one of its energy stores to another.
当系统发生变化时,能量从其中一个能量储存转移到另一个能量储存。
Transfers.
传递。
Energy moves between stores in four ways: mechanically (a force does work), electrically (a current flows), by heating (because of a temperature difference) and by radiation (light, infrared or sound waves).
能量在储存之间有四种传递方式:机械方式(力做功)、电的方式(电流流动)、加热方式(由于温差)和辐射方式(光、红外线或声波)。
So you can calculate changes caused by heating, by work done by forces and by work done when a current flows (topic 4.2).
因此,你可以计算加热、力做功以及电流流动时做功引起的变化(主题 4.2)。
"Electrical" is a way of transferring energy, not a store.
“电”是一种能量传递方式,而不是一种储存。
Describing a change.
描述变化。
Always say which store empties and which store fills.
始终要说明哪个储存中的能量减少,哪个储存中的能量增加。
Sankey diagrams.
桑基图。
A Sankey diagram shows energy transfers with arrows whose widths are drawn to scale.
桑基图用按比例绘制宽度的箭头表示能量传递。
The input arrow splits into a useful output and wasted outputs.
输入箭头分成有用输出和浪费的输出。
The output widths always add up to the input width, because energy is conserved.
输出箭头的宽度之和总等于输入箭头的宽度,因为能量守恒。
Worked example 1.
例题 1。
A motor is supplied with 100 J and transfers 80 J to the kinetic store of a fan.
一个电动机得到 100 J 能量,并将 80 J 传递到风扇的动能储存。
The rest heats the motor and the air.
其余能量加热电动机和空气。
Find the wasted energy and the widths of the Sankey arrows.
求浪费的能量和桑基图中箭头的宽度。
Wasted energy = 100 - 80 = 20 J.
浪费的能量 = 100 - 80 = 20 J。
The arrows are in the ratio 100 : 80 : 20 = 5 : 4 : 1, so if the input is 5 cm wide, the useful arrow is 4 cm and the wasted arrow 1 cm.
箭头宽度之比为 100 : 80 : 20 = 5 : 4 : 1,因此如果输入箭头宽 5 cm,有用输出箭头宽 4 cm,浪费输出箭头宽 1 cm。
Only the widths show the energy, not the lengths.
只有宽度表示能量,长度不表示能量。
A ball thrown upwards: its kinetic store empties and the gravitational potential store fills.
向上抛出的小球:它的动能储存减少,重力势能储存增加。
At the top, it stops for an instant.
在最高点,它会瞬间停止。
A car hitting a wall: the kinetic store empties; the thermal stores of the car and wall fill, and some energy is carried away by sound.
汽车撞墙:动能储存减少;汽车和墙的热能储存增加,一部分能量由声音带走。
A battery-powered toy car speeding up: the chemical store of the battery empties; the kinetic store of the car fills.
电池驱动的玩具车加速:电池的化学能储存减少;汽车的动能储存增加。
A car braking: the kinetic store empties; the thermal store of the brakes fills.
汽车刹车:动能储存减少;刹车装置的热能储存增加。
An electric kettle boiling water: energy is transferred electrically from the mains to the thermal store of the water.
电水壶烧水:能量通过电的方式从市电传递到水的热能储存。
The eight energy stores, with an example of each.
八种能量储存,每种都有一个例子。
Match each part of the diagram to the text.
将图中的各部分与文字配对。
The width of each arrow, not its length, shows the energy.
每个箭头的宽度表示能量,长度不表示能量。
Match each part of the diagram to the text.
将图中的各部分与文字配对。
Use mass in kg, speed in m/s, height and extension in m, and the value of g given in the question.
质量用 kg,速度用 m/s,高度和伸长量用 m,并使用题目给出的 g 值。
You must learn the first two; the equation for E_e is on the equations sheet.
你必须记住前两个公式;E_e 的公式在公式表上。
Extension is the increase in length: stretched length minus original length.
伸长量是长度的增加量:伸长后的长度减去原长。
The equation for E_e works only while the spring has not gone past its limit of proportionality.
E_e 的公式只在弹簧没有超过比例限度时适用。
Because e is squared, doubling the extension makes the stored energy four times as big.
因为 e 是平方的,所以伸长量加倍,储存的能量变为四倍。
Worked example 2.
例题 2。
A spring is 10 cm long.
一根弹簧长 10 cm。
It is stretched to 22 cm, and k = 50 N/m.
它被拉伸到 22 cm,且 k = 50 N/m。
Find the energy stored.
求储存的能量。
Extension e = 22 - 10 = 12 cm = 0.12 m.
伸长量 e = 22 - 10 = 12 cm = 0.12 m。
Then E_e = 1/2 times 50 times 0.12^2 = 0.36 J.
那么 E_e = 1/2 × 50 × 0.12^2 = 0.36 J。
If the extension were doubled to 0.24 m, the energy would be 4 times 0.36 = 1.44 J.
如果伸长量加倍至 0.24 m,能量就是 4 × 0.36 = 1.44 J。
Worked example 3.
例题 3。
The spring in example 2 launches a 0.020 kg toy plane horizontally.
例题 2 中的弹簧将一架 0.020 kg 的玩具飞机水平弹出。
Assume all the elastic potential energy becomes kinetic energy.
假设所有弹性势能都转化为动能。
Find the launch speed.
求弹出速度。
In a real launch, some energy is transferred to thermal stores, so the speed is a little less.
在实际弹射中,一部分能量会转移到热能储存中,所以速度稍低。
Worked example 4.
例题 4。
A 240 kg pod is fired upwards by two stretched cords.
一个 240 kg 的舱体由两根拉伸的绳索向上弹射。
Each cord acts like a spring with k = 735 N/m and extension 8.0 m.
每根绳索都像弹簧一样,k = 735 N/m,伸长量为 8.0 m。
Taking g = 9.8 N/kg, find the greatest height the pod could reach.
取 g = 9.8 N/kg,求舱体能达到的最大高度。
The real height is lower because air resistance acts on the pod, so some energy is transferred to the thermal store of the surroundings instead of the gravitational potential store.
实际高度较低,因为空气阻力作用于舱体,所以一部分能量转移到周围环境的热能储存,而不是重力势能储存。
E_k is kinetic energy in J; m is mass in kg; v is speed in m/s.
E_k 是动能,单位为 J;m 是质量,单位为 kg;v 是速度,单位为 m/s。
E_p is gravitational potential energy in J; h is the change in height in m; g is the gravitational field strength in N/kg (9.8 N/kg on Earth).
E_p 是重力势能,单位为 J;h 是高度变化,单位为 m;g 是重力场强度,单位为 N/kg(地球上为 9.8 N/kg)。
E_e is elastic potential energy in J; k is the spring constant in N/m; e is the extension in m.
E_e 是弹性势能,单位为 J;k 是弹簧常数,单位为 N/m;e 是伸长量,单位为 m。
Energy in one cord: E_e = 1/2 times 735 times 8.0^2 = 23 520 J.
一根绳索中的能量:E_e = 1/2 × 735 × 8.0^2 = 23 520 J。
Two cords: 2 times 23 520 = 47 040 J.
两根绳索:2 × 23 520 = 47 040 J。
If all of this becomes gravitational potential energy: h = E_p over m g = 47 040 over 240 times 9.8 = 20 m.
如果这些能量全部转化为重力势能:h = E_p 除以 m g = 47 040 除以 240 × 9.8 = 20 m。
When a substance is heated, the energy in its thermal store increases and its temperature rises: Delta E is the change in thermal energy in J, m the mass in kg and Delta theta the temperature change in °C.
物质受热时,其热能储存中的能量增加,温度升高:Delta E 是热能变化,单位为 J,m 是质量,单位为 kg,Delta theta 是温度变化,单位为 °C。
The specific heat capacity c is the energy needed to raise the temperature of 1 kg of a substance by 1 °C, in J/kg °C.
比热容 c 是使 1 kg 某种物质的温度升高 1 °C 所需的能量,单位为 J/kg °C。 这个公式在公式表上。
This equation is on the equations sheet. Water has a high specific heat capacity, about 4200 J/kg °C; copper's is about 385 J/kg °C.
水的比热容很高,约为 4200 J/kg °C;铜的比热容约为 385 J/kg °C。
So if 1 kg of each gains 4200 J, the water warms by 1.0 °C but the copper by 4200 div 385 = 10.9 °C.
因此,如果各 1 kg 的水和铜都获得 4200 J,水升温 1.0 °C,而铜升温 4200 ÷ 385 = 10.9 °C。
Worked example 5.
例题 5。
A 2.0 kg metal block gains 26 kJ of thermal energy, and its temperature rises from 22 °C to 50 °C.
一个 2.0 kg 的金属块获得 26 kJ 热能,温度从 22 °C 上升到 50 °C。 求 c。
Find c. Convert the energy: 26 kJ = 26 000 J.
换算能量:26 kJ = 26 000 J。
The temperature change is 50 - 22 = 28 °C.
温度变化是 50 - 22 = 28 °C。
Worked example 6.
例题 6。
A small volume of air, mass 2.60 times 10^-8 kg, gains 0.0130 J.
少量空气的质量为 2.60 × 10^-8 kg,获得了 0.0130 J。
Its specific heat capacity is 1.01 kJ/kg °C.
它的比热容为 1.01 kJ/kg °C。 求它的温度升高量。
Find its temperature rise. Convert: c = 1010 J/kg °C.
换算:c = 1010 J/kg °C。
Then This is the rise, not the final temperature.
那么,这是升高量,不是最终温度。
Required practical 1: specific heat capacity.
必做实验 1:比热容。
1. Measure the mass of a metal block on a balance, and wrap it in insulation.
1. 用天平测量金属块的质量,并用隔热材料包裹。
2. Put an electric heater in one hole and a thermometer in the other, with a drop of water for good thermal contact.
2. 将电加热器放入一个孔,将温度计放入另一个孔,并加一滴水以保证良好的热接触。
3. Connect the heater to a joulemeter, or to a power supply with an ammeter in series and a voltmeter across the heater, so that power P = VI.
3. 将加热器连接到焦耳计,或连接到电源,并将电流表串联、电压表并联在加热器两端,使功率 P = VI。
4. Record the starting temperature, switch on, and record the temperature and energy supplied (or the time, so E = Pt) every minute for 10 minutes.
4. 记录初始温度,接通电源,在 10 分钟内每分钟记录温度和输入的能量(或记录时间,以便用 E = Pt)。
5. Plot temperature against energy supplied, and use the straight part of the graph.
5. 绘制温度随输入能量变化的图像,并使用图像的直线部分。
Calculate c = Delta E over m Delta theta . The insulation reduces energy transferred to the surroundings.
计算 c = Delta E 除以 m Delta theta。
Some energy always escapes, so the block gains less energy than was supplied.
隔热材料减少向周围环境传递的能量。 总有一些能量散失,因此金属块获得的能量少于输入的能量。
Its temperature rise is then smaller than it should be, and the calculated value of c is too high.
这样它的温度升高量就比应有的值小,计算出的 c 值就偏高。
Worked example 7.
例题 7。
A 1.0 kg block is supplied with 6000 J and should warm by 12 °C, so c = 6000 over 1.0 times 12 = 500 J/kg °C.
向一个 1.0 kg 的金属块输入 6000 J,它应该升温 12 °C,因此 c = 6000 除以 1.0 × 12 = 500 J/kg °C。
Because energy escapes, a student records only a 10 °C rise, giving c = 6000 over 1.0 times 10 = 600 J/kg °C.
由于能量散失,一名学生记录到的升温只有 10 °C,得到 c = 6000 除以 1.0 × 10 = 600 J/kg °C。
A smaller temperature rise gives a value of c that is too high.
较小的温度升高量会使 c 的计算值偏高。
When a substance is heated, the energy in its thermal store increases and its temperature rises: Delta E is the change in thermal energy in J, m the mass in kg and Delta theta the temperature change in °C.
物质受热时,其热能储存中的能量增加,温度升高:Delta E 是热能变化,单位为 J,m 是质量,单位为 kg,Delta theta 是温度变化,单位为 °C。
The specific heat capacity c is the energy needed to raise the temperature of 1 kg of a substance by 1 °C, in J/kg °C.
比热容 c 是使 1 kg 某种物质的温度升高 1 °C 所需的能量,单位为 J/kg °C。
This equation is on the equations sheet.
这个公式在公式表上。
Required practical 1: ammeter in series with the heater, voltmeter across it; insulation reduces energy transfer to the surroundings.
必做实验 1:电流表与加热器串联,电压表并联在加热器两端;隔热材料减少向周围环境的能量传递。
Match each part of the diagram to the text.
将图中的各部分与文字配对。
Power is the rate at which energy is transferred, or the rate at which work is done.
功率是能量传递的速率,或做功的速率。
A more powerful motor lifts the same load through the same height in less time.
功率更大的电动机用更短的时间将相同的负载提升相同的高度。
P is power in watts, E energy transferred in J, W the work done in J and t the time in s.
P 是功率,单位为瓦特,E 是传递的能量,单位为 J,W 是所做的功,单位为 J,t 是时间,单位为 s。
A transfer of 1 J per second is a power of 1 watt (W).
每秒传递 1 J 的功率是 1 瓦特(W)。
Learn both equations.
记住这两个公式。
Prefixes: 1 kW = 1000 W, 1 MW = 10^6 W, 1 GW = 10^9 W.
词头:1 kW = 1000 W,1 MW = 10^6 W,1 GW = 10^9 W。
Worked example 8.
例题 8。
Motors A and B each lift a 20 kg load through 2.0 m (g = 10 N/kg).
电动机 A 和 B 各将一个 20 kg 的负载提升 2.0 m(g = 10 N/kg)。
A takes 2.0 s and B takes 4.0 s.
A 用时 2.0 s,B 用时 4.0 s。
Both gain E_p = 20 times 10 times 2.0 = 400 J.
两者都获得 E_p = 20 × 10 × 2.0 = 400 J。
So P_A = 400 over 2.0 = 200 W and P_B = 400 over 4.0 = 100 W.
因此 P_A = 400 除以 2.0 = 200 W,P_B = 400 除以 4.0 = 100 W。
A does the same work in half the time, so its power is twice as big.
A 用一半的时间做了相同的功,所以它的功率是两倍。
Worked example 9.
例题 9。
A 60.0 kg athlete runs up stairs with a vertical height of 175 cm in 1.40 s (g = 9.8 N/kg).
一名 60.0 kg 的运动员在 1.40 s 内跑上垂直高度为 175 cm 的楼梯(g = 9.8 N/kg)。
Convert the height: 1.75 m.
换算高度:1.75 m。
E_p = 60.0 times 9.8 times 1.75 = 1029 J, so the useful power is P = 1029 over 1.40 = 735 W.
E_p = 60.0 × 9.8 × 1.75 = 1029 J,所以有用功率为 P = 1029 除以 1.40 = 735 W。
The athlete's body transfers more energy than this, because some heats the body.
运动员的身体传递的能量比这更多,因为一部分能量使身体升温。
Worked example 10.
例题 10。
A power station has an output power of 500 MW.
一座发电站的输出功率为 500 MW。
Find the energy it transfers in one hour.
求它在一小时内传递的能量。
E = P t = 5.00 times 10^8 times 3600 = 1.8 times 10^12 J.
E = P t = 5.00 × 10^8 × 3600 = 1.8 × 10^12 J。
Power is the rate at which energy is transferred, or the rate at which work is done.
功率是能量传递的速率,或做功的速率。
A more powerful motor lifts the same load through the same height in less time.
功率更大的电动机用更短的时间将相同的负载提升相同的高度。
P is power in watts, E energy transferred in J, W the work done in J and t the time in s.
P 是功率,单位为瓦特,E 是传递的能量,单位为 J,W 是所做的功,单位为 J,t 是时间,单位为 s。
A transfer of 1 J per second is a power of 1 watt (W).
每秒传递 1 J 的功率是 1 瓦特(W)。
Energy can be transferred usefully, stored or dissipated, but it cannot be created or destroyed.
能量可以被有效传递、储存或耗散,但不能被创造或消灭。
Dissipated energy is often called wasted energy; it is stored in less useful ways, usually in the thermal store of the surroundings.
耗散的能量通常称为浪费的能量;它以较难利用的方式储存,通常储存在周围环境的热能储存中。
In a closed system, no energy enters or leaves, so the total energy stays the same.
在封闭系统中,没有能量进入或离开,因此总能量保持不变。
Worked example 11.
例题 11。
A ball is held above the floor with 20 J of gravitational potential energy.
一个小球被举在地板上方,具有 20 J 的重力势能。
Ignore air resistance.
忽略空气阻力。
The total is 20 J at every stage.
每个阶段的总能量都是 20 J。
In the end the energy is in the thermal stores of the ball, the floor and the air.
最后,能量储存在小球、地板和空气的热能储存中。
Explaining a smaller answer.
解释较小的结果。
If a real height, speed or temperature is less than you calculated, say three things: what caused it (air resistance, friction or heating of the surroundings); that some energy was transferred to thermal stores; so less energy reached the useful store.
如果实际高度、速度或温度低于你的计算值,要说明三点:是什么造成的(空气阻力、摩擦或周围环境受热);一部分能量转移到了热能储存中;因此到达有用储存的能量更少。
Reducing unwanted transfers.
减少不需要的传递。
Required practical 2 (physics only): thermal insulators.
必做实验 2(仅限物理课程):隔热材料。
1. Pour the same volume of hot water into a beaker, put on a lid, and wrap the beaker in one layer of a material such as newspaper, bubble wrap or cotton wool.
1. 将相同体积的热水倒入烧杯,盖上盖子,并用一层材料包裹烧杯,例如报纸、气泡膜或棉花。
2. Record the temperature every minute for 15 minutes.
2. 在 15 分钟内每分钟记录温度。
3. Repeat with other materials of the same thickness, keeping the volume of water, starting temperature, beaker and lid the same.
3. 用相同厚度的其他材料重复实验,保持水的体积、初始温度、烧杯和盖子相同。
4. Then repeat with different numbers of layers of one material.
4. 然后用同一种材料的不同层数重复实验。
The best insulator gives the smallest fall in temperature over the same time.
在相同时间内温度下降最少的材料是最好的隔热材料。
Worked example 12.
例题 12。
In AQA's sample results, water with no newspaper cooled from 85 °C to 57 °C in 15 minutes, with two layers from 86 °C to 62 °C, and with six layers from 86 °C to 66 °C.
在 AQA 的示例结果中,没有报纸时水温在 15 分钟内从 85 °C 降到 57 °C,两层报纸时从 86 °C 降到 62 °C,六层报纸时从 86 °C 降到 66 °C。
The falls are 85 - 57 = 28 °C, 86 - 62 = 24 °C and 86 - 66 = 20 °C.
温度下降量分别是 85 - 57 = 28 °C、86 - 62 = 24 °C 和 86 - 66 = 20 °C。
More layers gave less cooling.
层数越多,降温越少。
The run with no newspaper started 1 °C cooler, so a fair test should use the same starting temperature every time.
没有报纸的那次实验初始温度低了 1 °C,因此公平的实验应每次使用相同的初始温度。
Worked example 13.
例题 13。
One beaker, wrapped in 20 mm of cotton wool, cooled from 90 °C to 75 °C in 10 minutes; another, wrapped in 2 mm of foil, cooled from 80 °C to 70 °C.
一个包裹了 20 mm 厚棉花的烧杯在 10 分钟内从 90 °C 降到 75 °C;另一个包裹了 2 mm 厚箔片的烧杯从 80 °C 降到 70 °C。
Can we say which material is the better insulator? No.
我们能判断哪种材料的隔热性能更好吗?
Both the material and the thickness changed, and so did the starting temperature.
不能。 材料和厚度都改变了,初始温度也改变了。
Use the same thickness and starting temperature, change only the material, and repeat.
使用相同的厚度和初始温度,只改变材料,并重复实验。
Lubrication with oil or grease reduces friction between moving parts, so less energy is dissipated by heating.
用油或润滑脂润滑可以减小运动部件之间的摩擦,从而减少通过加热耗散的能量。
Thermal insulation reduces energy transfer by heating.
隔热可以减少通过加热传递的能量。
A material with a lower thermal conductivity transfers energy more slowly.
热导率较低的材料传递能量较慢。
For a house, the rate of cooling is lower if the walls are thicker and if they are made of a material with a lower thermal conductivity.
对于房屋,如果墙更厚,并且由热导率较低的材料制成,冷却速率就更低。
Cooling curves for zero, two and six layers of newspaper (AQA GCSE Physics Required Practical Handbook, sample results).
零层、两层和六层报纸的冷却曲线(AQA GCSE Physics 必做实验手册,示例结果)。
Read the axes and units first.
先看坐标轴和单位。
Efficiency tells you what fraction of the input energy is transferred usefully: You must learn both.
效率告诉你输入的能量中有多少比例被有效转移:这两种表达方式都必须掌握。
Efficiency can be a decimal or a percentage, and it can never be more than 1 (100%).
效率可以用小数或百分数表示,而且绝不会大于 1(100%)。
It has no unit.
它没有单位。
Worked example 14.
例题 14。
A lamp takes in 4.0 W and has an efficiency of 0.85.
一盏灯的输入功率为 4.0 W,效率为 0.85。
Useful light output = 0.85 times 4.0 = 3.4 W.
有用的光输出功率 = 0.85 × 4.0 = 3.4 W。
The other 4.0 - 3.4 = 0.6 W heats the surroundings.
其余的 4.0 - 3.4 = 0.6 W 用来加热周围环境。
Worked example 15.
例题 15。
Two lifting machines each take in 2000 W.
两台起重机的输入功率均为 2000 W。
Machine A gives a useful output of 1700 W and machine B 1500 W.
机器 A 的有用输出功率为 1700 W,机器 B 为 1500 W。
Efficiency of A = 1700 over 2000 = 0.85 = 85%; efficiency of B = 1500 over 2000 = 0.75 = 75%.
A 的效率 = 1700 / 2000 = 0.85 = 85%;B 的效率 = 1500 / 2000 = 0.75 = 75%。
Worked example 16.
例题 16。
Two ways of storing energy are compared.
下面比较两种储存能量的方法。
Method A heats 100 kg of water, storing 33 600 kJ, but 40% is wasted.
方法 A 加热 100 kg 的水,储存 33 600 kJ,但有 40% 被浪费。
Method B pumps 100 kg of water up a mountain, storing 490 kJ, and 25% is wasted.
方法 B 将 100 kg 的水抽到山上,储存 490 kJ,且有 25% 被浪费。
A transfers 0.60 times 33 600 = 20 160 kJ usefully; B transfers 0.75 times 490 = 367.5 kJ.
A 有效转移的能量为 0.60 × 33 600 = 20 160 kJ;B 转移的能量为 0.75 × 490 = 367.5 kJ。
B is more efficient, but A gives far more useful energy for each 100 kg, and B needs high mountains.
B 的效率更高,但每 100 kg 的水,A 提供的有用能量多得多,而且 B 需要高山。
(HT) Increasing efficiency.
(HT)提高效率。
Reduce wasted transfers: lubricate moving parts, insulate hot objects, and streamline moving vehicles.
减少无用的能量转移:给运动部件加润滑油,给高温物体做隔热处理,并将行驶中的车辆设计成流线型。
For the same input, more energy then reaches the useful store.
这样,对于相同的输入,就有更多能量到达有用的能量储存处。
Efficiency tells you what fraction of the input energy is transferred usefully: You must learn both.
效率告诉你输入的能量中有多少比例被有效转移:这两种表达方式都必须掌握。
Efficiency can be a decimal or a percentage, and it can never be more than 1 (100%).
效率可以用小数或百分数表示,而且绝不会大于 1(100%)。
It has no unit.
它没有单位。
The main energy resources are fossil fuels (coal, oil and gas), nuclear fuel, bio-fuel, wind, hydroelectricity, geothermal, the tides, the Sun and water waves.
主要能源包括化石燃料(煤、石油和天然气)、核燃料、生物燃料、风能、水力发电、地热能、潮汐能、太阳能和波浪能。
We use them for transport, electricity generation and heating.
我们利用它们进行交通运输、发电和供暖。
A renewable resource is one that is being, or can be, replaced as it is used.
可再生能源是指在使用过程中正在得到或能够得到补充的能源。
Fossil fuels and nuclear fuel are non-renewable: they will run out.
化石燃料和核燃料是不可再生能源:它们终将耗尽。
Renewable resources do not burn fuel, but building them still uses materials and energy, and some are not available all the time.
可再生能源不需要燃烧燃料,但建设相关设施仍要消耗材料和能量,而且有些可再生能源并非随时可用。
Decisions about energy also depend on cost, politics and what people want, not only on science.
有关能源的决策不仅取决于科学,还取决于成本、政治和人们的意愿。
Worked example 17.
例题 17。
A nuclear power station generated electricity for 92% of a 365-day year.
一座核电站在一年 365 天中的 92% 的时间里发电。
How many days was that?
这是多少天?
0.92 times 365 = 335.8, so about 336 days.
0.92 × 365 = 335.8,所以约为 336 天。
Worked example 18.
例题 18。
A country's electricity came from fossil fuels and renewables.
某国的电力来自化石燃料和可再生能源。
In year A it used 80 TWh from fossil fuels and 20 TWh from renewables; in year B, 90 TWh and 60 TWh.
在 A 年,该国使用了来自化石燃料的 80 TWh 电能和来自可再生能源的 20 TWh 电能;在 B 年,分别为 90 TWh 和 60 TWh。
The fossil share fell from 80 over 100 = 80% to 90 over 150 = 60%, but the energy from fossil fuels rose by 10 TWh, so emissions from fossil fuels did not fall.
化石燃料所占的比例从 80 / 100 = 80% 降到 90 / 150 = 60%,但来自化石燃料的电能增加了 10 TWh,因此化石燃料产生的排放量并未减少。
Worked example 19.
例题 19。
A clinic needs electricity all night.
一家诊所整晚都需要电力。
Solar panels give none at night, so they would need batteries or a backup supply.
太阳能电池板在夜间不发电,因此需要电池或备用电源。
A gas generator works at night, but releases carbon dioxide.
燃气发电机在夜间可以工作,但会排放二氧化碳。
A good answer compares reliability, cost and environmental effects.
好的答案会比较可靠性、成本和环境影响。
The main energy resources are fossil fuels (coal, oil and gas), nuclear fuel, bio-fuel, wind, hydroelectricity, geothermal, the tides, the Sun and water waves.
主要能源包括化石燃料(煤、石油和天然气)、核燃料、生物燃料、风能、水力发电、地热能、潮汐能、太阳能和波浪能。
We use them for transport, electricity generation and heating.
我们利用它们进行交通运输、发电和供暖。
A renewable resource is one that is being, or can be, replaced as it is used.
可再生能源是指在使用过程中正在得到或能够得到补充的能源。
Fossil fuels and nuclear fuel are non-renewable: they will run out.
化石燃料和核燃料是不可再生能源:它们终将耗尽。
AQA, GCSE Physics (8463) specification, section 4.1 Energy, and the Required practical handbook (sample results for practical 2).
AQA,GCSE Physics(8463)课程大纲,第 4.1 节能量,以及《必修实验手册》(实验 2 的示例结果)。
J. P. Joule, "On the mechanical equivalent of heat", Philosophical Transactions of the Royal Society, 140 (1850), read 21 June 1849.
J. P. 焦耳,《论热的机械当量》,《英国皇家学会哲学汇刊》,140(1850),于 1849 年 6 月 21 日宣读。
AQA, GCSE Physics Paper 1 Higher, June 2024, questions 1, 2, 6 and 8 (adapted).
AQA,GCSE Physics Paper 1 Higher,2024 年 6 月,第 1、2、6 和 8 题(改编)。
Calling "electrical" a store.
把“电”称为一种能量储存形式。
It is a way of transferring energy.
它是一种能量转移方式。
Using the stretched length instead of the extension in E_e = 1/2 k e^2.
在 E_e = 1/2 k e^2 中用拉伸后的长度代替伸长量。
Forgetting to square the speed or the extension.
忘记对速度或伸长量求平方。
Using the final temperature instead of the temperature change in Delta E = m c Delta theta .
在 Delta E = m c Delta theta 中用最终温度代替温度变化量。
Leaving time in minutes, mass in grams or energy in kJ.
时间仍用分钟、质量仍用克或能量仍用 kJ。
Saying energy is "lost" or "used up" without saying where it goes.
说能量“损失”或“用完”了,却不说明它去了哪里。
Giving an efficiency greater than 1 or 100%.
给出的效率大于 1 或 100%。
Saying renewable resources are always available.
说可再生能源总是可用。
Energy store: a way energy is held, such as kinetic, thermal or chemical.
能量储存:能量被储存的一种形式,例如动能、内能或化学能。
System: the object or group of objects being studied.
系统:正在研究的物体或物体群。
Specific heat capacity: the energy needed to raise 1 kg of a substance by 1 °C.
比热容:使 1 kg 某种物质的温度升高 1 °C 所需的能量。
Power: the rate of energy transfer, in watts.
功率:能量转移的速率,单位为瓦。
Dissipated energy: energy stored in less useful ways, usually thermal.
耗散能量:以用处较小的形式储存的能量,通常是内能。
Efficiency: useful output divided by total input.
效率:有用输出除以总输入。
Renewable resource: an energy resource that is replaced as it is used.
可再生能源:在使用过程中得到补充的能源。
1. Name the store that empties and the store that fills when a car brakes.
1. 说出汽车刹车时能量减少和能量增加的储存形式。
2. A 0.50 kg cart moves at 4.0 m/s.
2. 一辆 0.50 kg 的小车以 4.0 m/s 的速度运动。
Calculate its kinetic energy.
计算它的动能。
3.
3。
Comments
No comments yet. Be the first to ask or share something.