Chemistry-only: match emission lines and use calibration data
Introduced| English | Meaning |
|---|---|
| line spectrum/laɪn ˈspektrəm/ | A spectrum of separate bright lines at exact wavelengths, unique to each element. |
| calibration data/ˌkælɪˈbreɪʃn ˈdeɪtə/ | Readings taken from known standards so an instrument’s signal can be converted to a concentration. |
Reading starlight
- In 1868 astronomers saw a yellow line in the Sun's light that matched no known element. They named the element helium, after the Greek word for Sun — 27 years before it was found on Earth.
- Flame emission spectroscopy uses the same idea to identify metal ions in a lab.
The element first discovered from a line in the Sun's spectrum is ____.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
From the Greek for Sun.
How it works
- A sample is put into a flame. The metal ions give out light.
- An instrument (a spectroscope) splits the light into a line spectrum 线状光谱: a set of sharp coloured lines at fixed wavelengths.
What does a spectroscope produce from a flame?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Sharp lines at fixed wavelengths.
Every element has its own lines
- The pattern of lines is like a barcode: each metal ion has its own.
- Compare the unknown's spectrum with reference spectra of known ions.
How is a metal ion identified from its spectrum?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Match the whole pattern.
Worked example: a mixture of two ions
An unknown's spectrum is compared with references for lithium and sodium.
- Every lithium line appears in the unknown → lithium is present.
- Every sodium line also appears → sodium is present.
- A flame test would show mostly yellow (sodium masks lithium); the spectrum shows both.
Matching emission lines to references
Every line of a reference element must appear in the unknown's spectrum. When the unknown shows all the lines of two references, it contains both, which a single flame colour could not show.
Why is spectroscopy better than a flame test for a mixture?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Lines do not mask each other.
Measuring concentration
- The brightness of the lines increases with the concentration of the ion.
- Calibration data 校准数据 from solutions of known concentration give a graph. Read the unknown's concentration from it.
What is used to find the concentration of an ion?
Difficulty 1/5 · 100 coins + a small bonus on first completion today
Brightness vs concentration.
Matching one line is not enough. An element is identified only if all its reference lines appear in the unknown. A single line in the right place could belong to a different element.
One matching line is enough to identify an element.
Difficulty 1/5 · 100 coins + a small bonus on first completion today
All its lines must appear.
Flame emission spectroscopy splits light from a sample in a flame into a line spectrum. Each metal ion has its own pattern of lines, so mixtures can be identified. Line brightness, with a calibration graph, gives the ion's concentration.
Explain how flame emission spectroscopy can identify the metal ions in a mixture and measure their concentration.
Identify and measure.