Required practical 6: separate and identify actual food dyes
Introduit| English | Sens |
|---|---|
| origin line/ˈɒrɪdʒɪn laɪn/ | origin line : ligne de départ |
| solvent front/ˈsɒlvənt frʌnt/ | solvent front : front du solvant |
Which dyes are in the sweets?
- Food colourings must be approved for use. Food scientists check sweets and drinks by chromatography, comparing them with known, permitted dyes.
- In Required Practical 6 you do the same: separate the dyes in a colouring and identify them.
Setting up
- Draw the origin line 起始线 in pencil about 2 cm from the bottom of the paper. Pencil does not dissolve in the solvent.
- Put small spots of the unknown and of reference dyes (A, B, …) along the line.
- Stand the paper in a beaker with solvent below the line. Put a lid on.
Why is the origin line drawn in pencil?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
Ink would run and give false spots.
Running and measuring
- Remove the paper before the solvent reaches the top. Mark the solvent front 溶剂前沿 straight away in pencil.
- Measure from the origin line to the centre of each spot, and to the solvent front.
Order the steps of RP6.
Difficulté 3/5 · 200 pièces + un petit bonus lors de la première réussite aujourd'hui
Set up, run, mark, measure.
Worked example: identifying U
The solvent front moves 50 mm. Unknown U gives spots at 10, 30 and 40 mm. References: A has Rf 0.20; B has Rf 0.60.
- Rf of U's spots: $\dfrac{10}{50} = 0.20$, $\dfrac{30}{50} = 0.60$, $\dfrac{40}{50} = 0.80$.
- Matches: 0.20 = A, 0.60 = B.
- 0.80 matches neither: U also contains a dye that is not in the reference set.
Identify the dyes in a food colouring
The front travels 50 mm. Spots of U at 10 and 30 mm match references A (Rf 0.20) and B (Rf 0.60); a third spot at 40 mm (Rf 0.80) matches neither, so U contains another component.
The solvent front moves 75 mm and a spot moves 45 mm. What is its Rf?
Difficulté 2/5 · 140 pièces + un petit bonus lors de la première réussite aujourd'hui
$\dfrac{45}{75} = 0.60$.
References have Rf 0.25 (C) and 0.70 (D). An unknown has spots at 0.25 and 0.50. What does it contain?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
0.50 matches neither.
Good technique
- Keep the solvent level below the origin line, or the dyes dissolve into the solvent in the beaker.
- Use a lid so the solvent does not evaporate from the paper.
Why must the solvent level be below the origin line?
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
The spots would wash away.
Don't force every spot to match a reference. If an Rf value does not match any reference, say so. It is evidence of an extra substance, not a measuring mistake.
Every spot must match one of the reference dyes.
Difficulté 1/5 · 100 pièces + un petit bonus lors de la première réussite aujourd'hui
An unmatched spot is an unknown dye.
In RP6, spot the unknown and reference dyes on a pencil origin line, run the solvent, mark the solvent front and calculate each Rf. Matching Rf values in the same run identify dyes; an unmatched spot is an unknown component.
Describe how to use paper chromatography to find which permitted dyes are in a food colouring.
Same run, compare Rf.