OxfordAQA · International GCSE
Physique
Dossiers, échantillons et documents de programme pour ce cours.
Code de qualification: 9203
Fiches, feuilles d'exercices et diapositives
Les documents de sujet partagés conservent leurs titres de cours et de sujet d'origine. Utilisez la spécification de votre tableau choisi pour la couverture, le niveau et les exigences d'examen.
Supports de cours (8)
Fiches d'exercices (16)
- 1.1 Forces interactions and motion
- 1.2 Momentum safety and moments (P)
- 2.1 Forces work and power
- 2.2 Dissipation efficiency and resources
- 3.1 Wave properties and the EM spectrum
- 3.2 Sound reflection refraction and lenses
- 4.1 Kinetic theory and latent heat
- 4.2 Energy transfers by particles
- 5.1 Electrical circuits
- 5.2 Magnétisme et électromagnétisme
- 6.1 Generators transformers and the home (P)
- 6.2 The motor effect and electrical energy (P)
- 7.1 Atomic structure and radiation
- 7.2 Fission and fusion
- 8.1 Star life cycles and orbits
- 8.2 Red shift and the Big Bang (P)
Diaporamas de présentation (8)
Diaporamas de walkthrough d'exercices (16)
- 1.1 Forces interactions and motion · Walk-through
- 1.2 Momentum safety and moments (P) · Walk-through
- 2.1 Forces work and power · Walk-through
- 2.2 Dissipation efficiency and resources · Walk-through
- 3.1 Wave properties and the EM spectrum · Walk-through
- 3.2 Sound reflection refraction and lenses · Walk-through
- 4.1 Kinetic theory and latent heat · Walk-through
- 4.2 Energy transfers by particles · Walk-through
- 5.1 Electrical circuits · Walk-through
- 5.2 Magnétisme et électromagnétisme · Walk-through
- 6.1 Generators transformers and the home (P) · Walk-through
- 6.2 The motor effect and electrical energy (P) · Walk-through
- 7.1 Atomic structure and radiation · Walk-through
- 7.2 Fission and fusion · Walk-through
- 8.1 Star life cycles and orbits · Walk-through
- 8.2 Red shift and the Big Bang (P) · Walk-through
Guides d'enseignement (1)
Supports de cours · Physique IGCSE (6)
Fiches d'exercices · Physique IGCSE (24)
- 1.1 Quantités physiques et techniques de mesure
- 1.2 Mouvement
- 1.3 Masse et poids
- 1.4 Densité
- 1.5 Forces
- 1.6 Quantité de mouvement
- 1.7 Énergie, travail et puissance
- 1.8 Pression
- 2.1 Modèle cinétique des particules de la matière
- 2.2 Propriétés thermiques et température
- 2.3 Transfert d'énergie thermique
- 3.1 Propriétés générales des ondes
- 3.2 Clair
- 3.3 Spectre électromagnétique
- 3.4 Son
- 4.1 Phénomènes simples de magnétisme
- 4.2 Quantités électriques
- 4.3 Circuits électriques
- 4.4 Sécurité électrique
- 4.5 Effets électromagnétiques
- 5.1 Le modèle nucléaire de l'atome
- 5.2 Radioactivité
- 6.1 La Terre et le Système solaire
- 6.2 Étoiles et l'Univers
Diaporamas de présentation · Physique IGCSE (6)
Diaporamas de walkthrough d'exercices · Physique IGCSE (47)
- 1.1 Quantités physiques et techniques de mesure · Walk-through
- 1.1 Quantités physiques et techniques de mesure · Past-paper walk-through
- 1.2 Mouvement · Walk-through
- 1.2 Mouvement · Past-paper walk-through
- 1.3 Masse et poids · Walk-through
- 1.3 Masse et poids · Past-paper walk-through
- 1.4 Densité · Walk-through
- 1.4 Densité · Past-paper walk-through
- 1.5 Forces · Walk-through
- 1.5 Forces · Past-paper walk-through
- 1.6 Quantité de mouvement · Walk-through
- 1.6 Quantité de mouvement · Past-paper walk-through
- 1.7 Énergie, travail et puissance · Walk-through
- 1.7 Énergie, travail et puissance · Past-paper walk-through
- 1.8 Pression · Walk-through
- 1.8 Pression · Past-paper walk-through
- 2.1 Modèle cinétique des particules de la matière · Walk-through
- 2.1 Modèle cinétique des particules de la matière · Past-paper walk-through
- 2.2 Propriétés thermiques et température · Walk-through
- 2.2 Propriétés thermiques et température · Past-paper walk-through
- 2.3 Transfert d'énergie thermique · Walk-through
- 2.3 Transfert d'énergie thermique · Past-paper walk-through
- 3.1 Propriétés générales des ondes · Walk-through
- 3.1 Propriétés générales des ondes · Past-paper walk-through
- 3.2 Clair · Walk-through
- 3.2 Clair · Past-paper walk-through
- 3.3 Spectre électromagnétique · Walk-through
- 3.3 Spectre électromagnétique · Past-paper walk-through
- 3.4 Son · Walk-through
- 3.4 Son · Past-paper walk-through
- 4.1 Phénomènes simples de magnétisme · Walk-through
- 4.1 Phénomènes simples de magnétisme · Past-paper walk-through
- 4.2 Quantités électriques · Walk-through
- 4.2 Quantités électriques · Past-paper walk-through
- 4.3 Circuits électriques · Walk-through
- 4.3 Circuits électriques · Past-paper walk-through
- 4.4 Sécurité électrique · Walk-through
- 4.5 Effets électromagnétiques · Walk-through
- 4.5 Effets électromagnétiques · Past-paper walk-through
- 5.1 Le modèle nucléaire de l'atome · Walk-through
- 5.1 Le modèle nucléaire de l'atome · Past-paper walk-through
- 5.2 Radioactivité · Walk-through
- 5.2 Radioactivité · Past-paper walk-through
- 6.1 La Terre et le Système solaire · Walk-through
- 6.1 La Terre et le Système solaire · Past-paper walk-through
- 6.2 Étoiles et l'Univers · Walk-through
- 6.2 Étoiles et l'Univers · Past-paper walk-through
Unités de cours et objectifs d'apprentissage
Ces leçons abordent des objectifs de cours sélectionnés. Vérifiez les lacunes restantes en couverture ; ce matériel ne constitue pas un programme d'entraînement complet.
3.1 · Forces et leurs effets
- Rate of change of displacement.
- The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
- Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
- Mass multiplied by velocity.
- Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
- Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
- vitesse
- Taux de variation du déplacement
- accélération
- Taux de variation de la vitesse
- quantité de mouvement
- Masse multipliée par la vitesse
- force résultante
- La somme vectorielle des forces agissant sur un objet
3.2 · Énergie
- Energy transferred per unit time.
- Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
- Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
- puissance
- Énergie transférée par unité de temps
- efficacité
- Sortie utile divisée par l'input total
3.3 · Ondes
- Distance between successive points in phase.
- At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
- Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
- longueur d'onde
- Distance entre des points consécutifs en phase
- fréquence
- Nombre d'oscillations par unité de temps
3.4 · Modèle particulaire de la matière
- Energy per mass per temperature rise.
- Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
- Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
- Temperature on the kelvin scale.
- State which quantities stay fixed. A pressure-volume relation requires consistent units and a fixed temperature. The kelvin-based temperature ratio is an extension only where the course explicitly specifies it.
- Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
- capacité thermique massique
- Énergie par masse par élévation de température
- chaleur latente
- Énergie associée à un changement d'état
- température absolue
- Température sur l'échelle de Kelvin
- gaz parfait
- Un modèle de gaz avec des hypothèses simplificatrices spécifiées
3.5 · Électricité et magnétisme
- Rate of flow of charge.
- Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
- Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
- Creation of emf by changing flux linkage.
- Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
- Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
- courant
- Taux de flux de charge
- différence de potentiel
- Énergie transférée par unité de charge
- induction
- Création d'une f.é.m. par variation du flux lié
- transformateur
- Un dispositif transférant de l'énergie entre des bobines par variation de flux
3.6 · Production et distribution d'électricité ainsi que son usage domestique
- Creation of emf by changing flux linkage.
- Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
- Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
- Rate of flow of charge.
- Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
- Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
- induction
- Création d'une f.é.m. par variation du flux lié
- transformateur
- Un dispositif transférant de l'énergie entre des bobines par variation de flux
- courant
- Taux de flux de charge
- différence de potentiel
- Énergie transférée par unité de charge
3.7 · Physique nucléaire
- Time for activity or undecayed population to halve.
- Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
- Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
- demi-vie
- Temps nécessaire pour que l'activité ou la population non désintégrée soit divisée par deux
- rayonnement de fond
- Rayonnement mesuré à l'écart de la source étudiée
3.8 · Physique spatiale
- A stable stellar phase sustained by core hydrogen fusion.
- Read a life-cycle diagram as a model of stages and conditions, not a timed film of one star. The Sun is expected to follow the lower-mass route. Fusion combines light nuclei; it differs from fission of a heavy nucleus.
- Compare attributed stellar observations with predicted properties of each stage. Keep star, planet, galaxy and universe distinct. An orbiting body can have constant speed while its velocity changes direction.
- séquence principale
- Une phase stellaire stable maintenue par la fusion d'hydrogène au cœur
- naine blanche
- Un résidu compact sur la voie des étoiles de faible masse
Préparation à cette qualification
- 9203 separate Physics; do not relabel AQA 8463 or Cambridge 0625.
- Two untiered papers, each 90 marks and 1 h 30 min, each worth 50%; both can assess all content.
- Practical skills are assessed in writing; retain P labels distinguishing separate Physics.
Couverture pédagogique encore nécessaire
- All P-labelled separate-Physics statements including terminal velocity, centre of mass and moments remain.
- Complete resources and energy transfer objectives remain.
- Full sound, ultrasound, refraction/TIR and lens P statements remain.
- Use IGCSE gas variant; complete kinetic theory and energy changes remain.
- Full circuit, magnet and electromagnetic statements remain.
- Separate-Physics generator/transmission P statements and all household safety remain.
- Complete nuclear models, radiation, fission and P fusion statements remain.
- Full star-life-cycle and cosmology statements remain.
Spécifications et documents d'échantillon
Matériel pédagogique
Préparation du cours
Les documents sont disponibles. Les notes spécifiques au conseil, les évaluations et la pratique interactive des anciens sujets ne sont pas encore disponibles pour tous les cours.
Leçons →