Chemistry-only: match emission lines and use calibration data
Introducido| English | Significado |
|---|---|
| line spectrum/laɪn ˈspektrəm/ | espectro de líneas |
| calibration data/ˌkælɪˈbreɪʃn ˈdeɪtə/ | datos de calibración |
Reading starlight
- In 1868 astronomers saw a yellow line in the Sun's light that matched no known element. They named the element helium, after the Greek word for Sun — 27 years before it was found on Earth.
- Flame emission spectroscopy uses the same idea to identify metal ions in a lab.
The element first discovered from a line in the Sun's spectrum is ____.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
From the Greek for Sun.
How it works
- A sample is put into a flame. The metal ions give out light.
- An instrument (a spectroscope) splits the light into a line spectrum 线状光谱: a set of sharp coloured lines at fixed wavelengths.
What does a spectroscope produce from a flame?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Sharp lines at fixed wavelengths.
Every element has its own lines
- The pattern of lines is like a barcode: each metal ion has its own.
- Compare the unknown's spectrum with reference spectra of known ions.
How is a metal ion identified from its spectrum?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Match the whole pattern.
Worked example: a mixture of two ions
An unknown's spectrum is compared with references for lithium and sodium.
- Every lithium line appears in the unknown → lithium is present.
- Every sodium line also appears → sodium is present.
- A flame test would show mostly yellow (sodium masks lithium); the spectrum shows both.
Matching emission lines to references
Every line of a reference element must appear in the unknown's spectrum. When the unknown shows all the lines of two references, it contains both, which a single flame colour could not show.
Why is spectroscopy better than a flame test for a mixture?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Lines do not mask each other.
Measuring concentration
- The brightness of the lines increases with the concentration of the ion.
- Calibration data 校准数据 from solutions of known concentration give a graph. Read the unknown's concentration from it.
What is used to find the concentration of an ion?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Brightness vs concentration.
Matching one line is not enough. An element is identified only if all its reference lines appear in the unknown. A single line in the right place could belong to a different element.
One matching line is enough to identify an element.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
All its lines must appear.
Flame emission spectroscopy splits light from a sample in a flame into a line spectrum. Each metal ion has its own pattern of lines, so mixtures can be identified. Line brightness, with a calibration graph, gives the ion's concentration.
Explain how flame emission spectroscopy can identify the metal ions in a mixture and measure their concentration.
Identify and measure.