Chemistry-only: yeast fermentation produces aqueous ethanol
Introducido| English | Significado |
|---|---|
| fermentation/fɜːmənˈteɪʃn/ | fermentación |
| anaerobic conditions/ˌæneəˈrəʊbɪk kənˈdɪʃnz/ | condiciones anaeróbicas |
9000 years of brewing
- Chemical traces in pottery from Jiahu, China, show people were fermenting rice, honey and fruit about 9000 years ago.
- Fermentation 发酵 uses yeast to turn sugar into ethanol. It is still how all beer, wine and much fuel ethanol is made.
The reaction
- glucose → ethanol + carbon dioxide.
- $\text{C}_6\text{H}_{12}\text{O}_6 \rightarrow 2\text{C}_2\text{H}_5\text{OH} + 2\text{CO}_2$.
- Enzymes in the yeast are the catalyst.
What are the products of fermentation?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Glucose → ethanol + CO₂.
The conditions
- Temperature 30–35 °C: warm enough for the enzymes to work fast, not so hot that they denature.
- Anaerobic conditions 无氧条件: no oxygen, or the ethanol is oxidised to ethanoic acid.
- Sugar dissolved in water, with yeast.
Why is fermentation kept at 30–35 °C?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Warm, not hot.
Why must air be kept out?
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
Anaerobic conditions.
Worked example: gas from yeast
Three flasks with yeast give 18, 21 and 21 cm³ of gas. A flask without yeast gives 2 cm³.
- Mean $= \dfrac{18 + 21 + 21}{3} = 20$ cm³.
- Effect of the yeast $= 20 - 2 = 18$ cm³.
- The control shows how much gas came from something other than fermentation.
Mean gas volume against a control
Readings of 18, 21 and 21 cm³ give a mean of 20 cm³. A yeast-free control gives 2 cm³, so the yeast's effect is 18 cm³ under this method.
Gas volumes are 24, 26 and 25 cm³; a no-yeast control gives 3 cm³. What is the effect of the yeast?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Mean 25 − 3 = 22 cm³.
Fermentation vs hydration
- Fermentation: renewable sugar, low temperature, but slow, batch process and only about 15% ethanol.
- Hydration of ethene: fast, continuous, pure ethanol, but uses crude oil and high temperature.
Fermentation or hydration of ethene?
Dificultad 2/5 · 140 monedas + un pequeño bono en el primer intento de hoy
Two methods.
Bubbles do not measure the ethanol directly. They show CO₂ is being made. Collecting a lot of gas does not tell you the ethanol concentration, which must be found by distillation or a density test.
The volume of gas tells you the ethanol concentration.
Dificultad 1/5 · 100 monedas + un pequeño bono en el primer intento de hoy
It shows CO₂ production only.
Fermentation turns glucose into ethanol and CO₂ using yeast at 30–35 °C under anaerobic conditions. It uses renewable sugar but is slow and gives a dilute solution, unlike the hydration of ethene.
Write the equation for fermentation and describe the conditions needed, with reasons.
Yeast, warm, no air.