Skip to content

IGCSE Physics · November 2024 · Paper 41 · Difficulty 4 · Challenging

Question 6

6

A potential divider is made by connecting a light-dependent resistor (LDR) and a thermistor in series. Fig. 6.1 shows the potential divider, a voltmeter and a direct current (d.c.) power supply connected into a circuit.

Fig. 6.1

The voltmeter measures the potential difference (p.d.) across the LDR.

(a)

Define potential difference (p.d.).[2]

(b)

The electromotive force (e.m.f.) of the supply is $E$.

Describe how the p.d. across the thermistor can be determined using the reading on the voltmeter.[1]

(c)

The resistance of the LDR decreases and the resistance of the thermistor increases.

(i)

State what has happened to the light intensity incident on the LDR and the temperature of the thermistor.

intensity of incident light on LDR:

temperature of thermistor: [1]

(ii)

Explain what happens to the reading on the voltmeter.[3]

[Total: 7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

6(a)

  • Potential difference is the work done per unit charge moving through a component.

6(b)

  • The series p.d.s add to the supply e.m.f. The thermistor p.d. is $\mathbf{V_{\mathrm{thermistor}} = E - V_{\mathrm{LDR}}}$, where $V_{\mathrm{LDR}}$ is the voltmeter reading.

6(c)(i)

  • The light intensity increased and the thermistor temperature decreased.

6(c)(ii)

  • The LDR resistance becomes a smaller fraction of the total resistance.
  • The supply e.m.f. stays constant, so the LDR gets a smaller fraction of the supply p.d.
  • The voltmeter reading therefore decreases.
Original question

Log in or create account

IGCSE, A-Level & AP