Skip to content

IGCSE Physics · November 2022 · Paper 62 · Difficulty 3 · Standard

Question 3

3

A student investigates the balancing of a metre rule.

Fig. 3.1 shows the set-up.

(a)

The student places the metre rule on the pivot so that the metre rule is as near as possible to being balanced. Fig. 3.2 shows the position of the pivot.

Record the scale reading S on the metre rule at the point where the rule balances on the pivot.

S = cm[1]

(b)

The metre rule is 4mm thick. The pivot is under the metre rule. The scale is on the top of the metre rule. Suggest how you would obtain an accurate value of the scale reading S.[1]

[1]

(c)

• The student places an object Q with its centre on the metre rule at the 90.0cm mark. The position of Q is not changed during the experiment.

  • He places a load P of weight P = 1.0N on the metre rule.
  • He adjusts the position of load P so that the metre rule is as near as possible to being balanced with the pivot directly below the scale reading S.
  • He records, in Table 3.1, the distance a from the centre of load P to the centre of load Q.
  • He repeats the procedure using loads of weight P = 2.0N, 3.0N, 4.0N and 5.0N.
  • He records all the values of a in Table 3.1.

Complete the column headings in Table 3.1 by inserting the unit in the $\frac{1}{P}$ column.[1]

P/Na/cm$\frac{1}{P}$/
1.080.01.00
2.059.50.50
3.054.50.33
4.050.40.25
5.047.80.20
(d)

Plot a graph of a/cm (y-axis) against $\frac{1}{P}$ (x-axis). Start the y-axis at a/cm = 30.[4]

(e)

Determine the gradient G of the graph. Show clearly on the graph how you obtained the necessary information.

G = [3]

(f)

The gradient G is numerically equal to the distance d between the pivot and the centre of load Q. Record the value of d to a suitable number of significant figures for this experiment.

d = cm[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • The balance point is at $S = \mathbf{48.8}\,\mathrm{cm}$.

3(b)

  • Look straight down at the scale above the pivot to avoid parallax.

3(c)

  • Since $P$ is measured in newtons, $1/P$ has unit $\mathrm{N^{-1}}$.

3(d)

  • Label the horizontal axis $(1/P)/\mathrm{N^{-1}}$ and the vertical axis $a/\mathrm{cm}$. Start the vertical scale at $30\,\mathrm{cm}$. Choose evenly spaced scales that use at least half the grid.
  • Plot $(1.00,80.0)$, $(0.50,59.5)$, $(0.33,54.5)$, $(0.25,50.4)$ and $(0.20,47.8)$ accurately to within half a small square. Draw a thin, continuous best-fit line.

3(e)

  • Use $G = \Delta a/\Delta(1/P)$. Draw a large triangle covering at least half the line between the extreme points.
  • For example, $G = (80.0-47.8)\,\mathrm{cm}/(1.00-0.20)\,\mathrm{N^{-1}} = \mathbf{40.3}\,\mathrm{N\,cm}$. Your result depends on your line.

3(f)

  • The distance is numerically equal to your gradient, so for $G = 40.3\,\mathrm{N\,cm}$, $d = \mathbf{40.3}\,\mathrm{cm}$.
Original question

Log in or create account

IGCSE, A-Level & AP