Skip to content

IGCSE Physics · November 2022 · Paper 61 · Difficulty 3 · Standard

Question 1

1

A student investigates the period of a pendulum. Fig. 1.1 and Fig. 1.2 show the set-up.

Fig. 1.1
(a)

Explain briefly how to measure to the centre of the pendulum bob as accurately as possible.[1]

(b)

The student adjusts the length of the pendulum until the distance $l$, measured from the bottom of the clamp supporting the pendulum to the centre of the pendulum bob, is 50.0 cm.

He displaces the bob slightly and releases it so that it swings. Fig. 1.2 shows one complete oscillation of the pendulum.

He measures and records the time $t$ for 20 complete oscillations.

(i)

Calculate, and record in Table 1.1, the period $T$ of the pendulum. The period is the time for one complete oscillation.[1]

(ii)

Calculate, and record in Table 1.1, the value of $T^2$.[1]

Table 1.1

$l$/cm$t$/s$T$/s$T^2$/s$^2$
50.028.2
60.031.21.562.43
70.033.61.682.82
80.035.81.793.20
90.038.21.913.65

He repeats the procedure using $l$ values of 60.0 cm, 70.0 cm, 80.0 cm and 90.0 cm. The readings and results are shown in Table 1.1.

(c)

Plot a graph of $T^2$/s$^2$ ($y$-axis) against $l$/cm ($x$-axis). Start the $T^2$/s$^2$ axis at a convenient value close to the minimum value of $T^2$/s$^2$.[4]

(d)

Determine the gradient $G$ of the graph. Show clearly on the graph how you obtained the necessary information.

$G$ = [3]

(e)

Explain briefly why timing 20 oscillations gives a more accurate result for the period $T$ than timing 1 oscillation.[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Place a vertical ruler with its zero at the suspension point. Hold a set square horizontally from the centre of the bob to the ruler, then read the pendulum length.

1(b)(i)

  • Use $T = t/20$, because the time is for 20 oscillations.
  • $T = 28.2\,\mathrm{s}/20 = \mathbf{1.41}\,\mathrm{s}$.

1(b)(ii)

  • Use $T^2 = T\times T$.
  • $T^2 = (1.41\,\mathrm{s})^2 = \mathbf{1.99}\,\mathrm{s^2}$ to two decimal places.

1(c)

  • Label the horizontal axis $l/\mathrm{cm}$ and the vertical axis $T^2/\mathrm{s^2}$. Start the vertical axis near $1.99\,\mathrm{s^2}$, for example at $1.8\,\mathrm{s^2}$. Use even scales that fill much of the grid.
  • Plot $(50.0, 1.99)$, $(60.0, 2.43)$, $(70.0, 2.82)$, $(80.0, 3.20)$ and $(90.0, 3.65)$ accurately, then draw a thin, continuous best-fit line.

1(d)

  • Use $G = \Delta T^2/\Delta l$. Draw a large triangle on the best-fit line, at least half as long as the line.
  • For example, using points close to the ends gives $G = (3.65-1.99)\,\mathrm{s^2}/(90.0-50.0)\,\mathrm{cm} = \mathbf{0.0415}\,\mathrm{s^2/cm}$. Your value depends on your line.

1(e)

  • The reaction time is a smaller fraction of the total time for 20 oscillations, so the period has a smaller percentage uncertainty.
Original question

Log in or create account

IGCSE, A-Level & AP