Skip to content

IGCSE Physics · November 2022 · Paper 52 · Difficulty 2 · Core

Question 1

1

In this experiment, you will investigate temperature changes when mixing hot and cold water.

Carry out the following instructions, referring to Fig. 1.1.

(a)

Use the thermometer to measure room temperature $\theta_R$.

$\theta_R$ = °C[1]

(b)

• Pour 100 cm$^3$ of cold water into beaker A.

  • Record the temperature $\theta_C$ of the cold water. $\theta_C$ = °C
  • Pour 100 cm$^3$ of the hot water provided into beaker B.
  • Record the temperature $\theta_H$ of the hot water. $\theta_H$ = °C
  • Immediately pour the cold water into the hot water in beaker B. Stir the mixture and record the highest temperature $\theta_M$ of the mixture.

$\theta_M$ = °C[2]

(c)
(i)

Calculate the decrease in temperature $\Delta\theta_1$ of the hot water using the equation $\Delta\theta_1 = (\theta_H - \theta_M)$. Include the unit.

$\Delta\theta_1$ = [1]

(ii)

Calculate the increase in temperature $\Delta\theta_2$ of the cold water using the equation $\Delta\theta_2 = (\theta_M - \theta_C)$. Include the unit.

$\Delta\theta_2$ = [1]

(d)

Calculate the average $\theta_A$ of the temperatures $\theta_H$ and $\theta_C$.

Show your working.

$\theta_A$ = °C[2]

(e)

State whether $\theta_A$ and $\theta_M$ can be considered to be equal within the limits of experimental accuracy. Justify your answer by reference to your results.

statement

justification

[2]

(f)

State two requirements when reading the volume of water in a measuring cylinder to obtain an accurate result.

  1. [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Read the thermometer in the room. A typical reading is $\mathbf{20}\,^\circ\mathrm{C}$, but use your measured value.

1(b)

  • Measure each temperature; the readings depend on your experiment. For example, $\theta_C = \mathbf{20}\,^\circ\mathrm{C}$ and $\theta_H = \mathbf{60}\,^\circ\mathrm{C}$.
  • Stir and record the highest mixture temperature. For example, $\theta_M = \mathbf{35}\,^\circ\mathrm{C}$; it should lie between the cold and hot readings.

1(c)(i)

  • Use $\Delta\theta_1 = \theta_H - \theta_M$. Substitute your measured temperatures.
  • For example, $(60\,^\circ\mathrm{C}) - (35\,^\circ\mathrm{C}) = \mathbf{25}\,^\circ\mathrm{C}$.

1(c)(ii)

  • Use $\Delta\theta_2 = \theta_M - \theta_C$. Substitute your measured temperatures.
  • For example, $(35\,^\circ\mathrm{C}) - (20\,^\circ\mathrm{C}) = \mathbf{15}\,^\circ\mathrm{C}$.

1(d)

  • Use $\theta_A = (\theta_H + \theta_C)/2$ to find the average.
  • For example, $\theta_A = ((60\,^\circ\mathrm{C}) + (20\,^\circ\mathrm{C}))/2 = \mathbf{40}\,^\circ\mathrm{C}$. Use your own readings.

1(e)

  • Compare your values of $\theta_A$ and $\theta_M$. Their difference must be small enough to be explained by measurement uncertainty.
  • For example, $40\,^\circ\mathrm{C}$ and $35\,^\circ\mathrm{C}$ differ by more than $10\%$, so they are not equal within experimental accuracy.

1(f)

  • Place the cylinder upright on a flat surface.
  • Read the bottom of the meniscus at eye level to avoid parallax error.
Original question

Log in or create account

IGCSE, A-Level & AP