Skip to content

IGCSE Physics · November 2020 · Paper 43 · Difficulty 4 · Challenging

Question 8

8
(a)
(i)

Fig. 8.1 shows an electrical circuit. The resistor has a resistance of $4.0\,\Omega$. The reading on the voltmeter is $3.0\text{ V}$.

Fig. 8.1

Calculate the current in the resistor.

current = [2]

(ii)

Fig. 8.2 shows the same circuit with one component reversed.

Fig. 8.2

State the reading on the voltmeter and explain your answer.

reading =

explanation

[2]

(b)

Fig. 8.3 shows the symbol for a logic gate.

Fig. 8.3

The truth table for this logic gate is shown in Table 8.1.

Table 8.1

input Xinput Youtput Z
000
010
100
111

State the name of this logic gate. ..[1]

(c)
(i)

A student designs the circuit shown in Fig. 8.4.

Fig. 8.4

Complete the truth table for this circuit in Table 8.2.

Table 8.2

ABCDE
00
01
10
11

[3]

(ii)

A single logic gate can be used to produce output E in Fig. 8.4 with the inputs A and B shown in Table 8.2.

State the name of this logic gate. .[1]

[Total: 9]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

8(a)(i)

  • Use $V = IR$, so $I = V/R$.
  • $I = \frac{3.0\,\mathrm{V}}{4.0\,\mathrm{\Omega}} = \mathbf{0.75}\,\mathrm{A}$.

8(a)(ii)

  • The voltmeter reads $\mathbf{0}\,\mathrm{V}$ because the reversed diode does not allow current through the resistor.

8(b)

  • The output is 1 only when both inputs are 1, so this is an AND gate.

8(c)(i)

  • For input rows 00, 01, 10 and 11, C and D are each 1, 0, 0, 0. They are 1 only when both inputs are 0.
  • E is the opposite of D, so its outputs are 0, 1, 1, 1 for the same rows.

8(c)(ii)

  • The single equivalent gate is an OR gate: E is 1 when A or B, or both, are 1.
Original question

Log in or create account

IGCSE, A-Level & AP