Skip to content

IGCSE Physics · June 2025 · Paper 41 · Difficulty 4 · Challenging

Question 8

8

Fig. 8.1 shows a diagram of part of a simple a.c. generator.

(a)
(i)

Identify components A and B in Fig. 8.1.

A

B [2]

(ii)

Component C is made of soft iron.

Describe the effect of this component on the generator.

[1]

(b)

The coil of the generator rotates at a constant speed of two complete revolutions per second.

Sketch a graph of the e.m.f. generated against time on the axes in Fig. 8.2. The coil is in the position shown in Fig. 8.1 at time = 0.

[3]

(c)

In power stations, transformers are used to step up the voltage of electricity generated before it is transmitted through cables over long distances.

(i)

Explain the advantages of transmitting electricity at high voltages.

[2]

(ii)

A power station generates electricity at 25000 V. A transformer steps up the voltage to 300000 V. The primary coil of the step-up transformer has 450 turns.

Calculate the number of turns $N_s$ on the secondary coil of the transformer.

$N_s$ = [2]

[Total: 10]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

8(a)(i)

  • A is the $\textbf{carbon brushes}$ and B is the $\textbf{slip rings}$.

8(a)(ii)

  • The soft iron core $\textbf{strengthens the magnetic field}$.

8(b)

  • At two revolutions per second, use $T = 1/f$: $T = 1/(2\,\mathrm{Hz}) = 0.50\,\mathrm{s}$.
  • Draw a smooth sinusoidal curve with positive and negative values, completing two cycles in $1.00\,\mathrm{s}$.
  • Start at a maximum at $0.00\,\mathrm{s}$, reach a minimum at $0.25\,\mathrm{s}$ and return to a maximum at $0.50\,\mathrm{s}$.

8(c)(i)

  • For the same transmitted power, a higher voltage gives a lower current because $P = IV$.
  • Power lost as heat in the cables is $P_{\rm loss} = I^2R$, so the lower current reduces the loss.

8(c)(ii)

  • Use the transformer equation $V_p/V_s = N_p/N_s$, so $N_s = N_pV_s/V_p$.
  • $N_s = (450)(300000\,\mathrm{V})/(25000\,\mathrm{V}) = \mathbf{5400}$ turns.
Original question

Log in or create account

IGCSE, A-Level & AP