Skip to content

IGCSE Physics · June 2023 · Paper 62 · Difficulty 3 · Standard

Question 1

1

A student investigates the stretching of a spring.

Fig. 1.1 shows the set-up.

(a)

The value $l_0$ is the length of the spring when the load $L$ is $0.0\text{ N}$.

The student measures the length $l_0$ of the spring. She records $l_0 = 16\text{ mm}$ in Table 1.1.

Draw a diagram of the spring to show clearly the length $l_0$ of the spring.[1]

(b)

The student suspends a load $L = 0.20\text{ N}$ from the spring. She records the new length $l$ of the spring in Table 1.1.

She repeats the procedure using loads $L = 0.40\text{ N}$, $0.60\text{ N}$, $0.80\text{ N}$ and $1.00\text{ N}$. The readings are shown in Table 1.1.

(i)

Calculate the extension $e$ of the spring for each load using the equation $e = (l - l_0)$.

Record the values of $e$ in Table 1.1.[2]

(ii)

Complete the column headings in Table 1.1.

Table 1.1

$L /$$l /$$e /$
$0.00$$16$$0$
$0.20$$18$
$0.40$$21$
$0.60$$23$
$0.80$$24$
$1.00$$26$

[1]

(c)

Plot a graph of $L$ ($y$-axis) against $e$ ($x$-axis).

Draw the best-fit line.

[4]

(d)

Use the graph to determine $e_\text{A}$, the extension produced by a load of $0.50\text{ N}$. Show clearly on the graph how you obtained the necessary information.

$e_\text{A} =$ [3]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Draw the spring with no load. Mark $l_0$ as the distance from the top end of the spring to its bottom end.

1(b)(i)

  • Use $e = l - l_0$, where $l_0 = 16\,\mathrm{mm}$.
  • For $l = 18\,\mathrm{mm}$, $e = 18\,\mathrm{mm} - 16\,\mathrm{mm} = \mathbf{2}\,\mathrm{mm}$.
  • In load order, the extensions are $\mathbf{0, 2, 5, 7, 8, 10}\,\mathrm{mm}$.

1(b)(ii)

  • Label the columns $L / \mathrm{N}$, $l / \mathrm{mm}$ and $e / \mathrm{mm}$.

1(c)

  • Put $e / \mathrm{mm}$ on the horizontal axis and $L / \mathrm{N}$ on the vertical axis. Choose scales that use at least half the grid.
  • Plot all six points, including the origin, then draw a thin, continuous best-fit line.

1(d)

  • From $L = 0.50\,\mathrm{N}$, draw across to the best-fit line and then down to the extension axis.
  • Read approximately $e_A = \mathbf{5.2}\,\mathrm{mm}$. The value can vary slightly with your line.
Original question

Log in or create account

IGCSE, A-Level & AP