Skip to content

IGCSE Physics · June 2023 · Paper 31 · Difficulty 3 · Standard

Question 2

2

Fig. 2.1 shows a concrete beam resting on the ground.

(a)

The weight of the concrete beam is 1540 N.

Calculate the pressure on the ground due to the concrete beam.

pressure = N/cm$^2$[4]

(b)

A builder starts to raise one end of the beam.

He uses a force of 1030 N at a perpendicular distance of 120 cm from the pivot. Fig. 2.2 shows the arrangement.

Calculate the moment of the 1030 N force about the pivot.

moment = Ncm[3]

(c)

Describe how the builder can use a smaller force to lift the beam.

[1]

(d)

The builder positions the beam as shown in Fig. 2.3.

State why the beam shown in Fig. 2.3 is less stable than the beam shown in Fig. 2.1.

[1]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

2(a)

  • Use $p = F_W/A$, where $F_W$ is the weight of the beam and $A$ is its contact area.
  • $A = (160\,\mathrm{cm})(12\,\mathrm{cm}) = 1920\,\mathrm{cm^2}$.
  • $p = 1540\,\mathrm{N}/1920\,\mathrm{cm^2} = \mathbf{0.80}\,\mathrm{N/cm^2}$.

2(b)

  • Use moment $M = F_L d$, where $F_L$ is the lifting force and $d$ is the perpendicular distance from the pivot.
  • $M = (1030\,\mathrm{N})(120\,\mathrm{cm}) = 123600\,\mathrm{N\,cm} \approx \mathbf{1.2\times10^5}\,\mathrm{N\,cm}$.

2(c)

  • Apply the force further from the pivot, so a smaller force gives the same moment.

2(d)

  • Its centre of gravity is higher, so it is easier to topple.
Original question

Log in or create account

IGCSE, A-Level & AP