Skip to content

IGCSE Physics · June 2022 · Paper 52 · Difficulty 3 · Standard

Question 3

3

In this experiment, you will determine the focal length $f$ of a lens.

Carry out the following instructions, referring to Fig. 3.1.

(a)

• Place the screen a distance $D = 75.0\text{ cm}$ from the illuminated object.

  • Place the lens between the object and the screen so that the lens is close to the illuminated object.
  • Move the lens away from the object until a clearly focused image is formed on the screen.
(i)

Measure, and record in Table 3.1, the distance $u$ between the centre of the lens and the illuminated object.[1]

(ii)

Measure, and record in Table 3.1, the distance $v$ between the centre of the lens and the screen.[1]

(iii)

Calculate, and record in Table 3.1, the focal length $f$ of the lens using the equation $f = \frac{uv}{D}$.[1]

(b)

• Place the screen at a distance $D = 85.0\text{ cm}$ from the illuminated object.

  • Place the lens between the object and the screen so that the lens is close to the illuminated object.
  • Move the lens until a clearly focused image is formed on the screen.

Measure, and record in Table 3.1, the distance $u$ between the centre of the lens and the illuminated object.

Measure, and record in Table 3.1, the distance $v$ between the centre of the lens and the screen.

Calculate, and record in Table 3.1, the focal length $f$ of the lens using the equation $f = \frac{uv}{D}$.

Table 3.1

D/cmu/cmv/cmf/cm
75.0
85.0

[2]

(c)

Calculate the average value $f_A$ of the focal length of the lens. Show your working.

$f_A = ................................................... \text{ cm}$[2]

(d)

State two precautions that you took to obtain accurate readings in this experiment.

  1. [2]
(e)

A student states that a more accurate value for the focal length $f$ of the lens can be determined by plotting a graph of $uv$ against $D$. The gradient of the graph is numerically equal to the focal length.

(i)

Suggest a suitable number of sets of readings that the student should take.

[1]

(ii)

Explain briefly how this graphical method can give a more accurate value for the focal length.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • Measure from the illuminated object to the centre of the focused lens. Record your measured $u$ in cm; it should be less than $30\,\mathrm{cm}$.

3(a)(ii)

  • Measure from the centre of the lens to the screen. Since $D = 75.0\,\mathrm{cm}$, use $v = \mathbf{D - u}$.

3(a)(iii)

  • Use $f = uv / D$. Put your measured $u$ and $v$ in cm and use $D = 75.0\,\mathrm{cm}$.
  • $f = \mathbf{uv / (75.0\,\mathrm{cm})}$; record the result in cm.

3(b)

  • Focus the image and measure $u$ and $v$ in cm. The new $u$ should be above $15\,\mathrm{cm}$ and smaller than the first $u$.
  • Check that $u + v$ is within $1.0\,\mathrm{cm}$ of $85.0\,\mathrm{cm}$, because the lens lies between the object and screen.
  • Use $f = uv / D$, so $f = \mathbf{uv / (85.0\,\mathrm{cm})}$. Enter your measured distances to find $f$ in cm.

3(c)

  • Use $f_A = (f_1 + f_2) / 2$, where $f_1$ and $f_2$ are the two values in your table.
  • Add your two focal lengths in cm and divide by $2$: $f_A = \mathbf{(f_1 + f_2) / 2}$. The result should be between $\mathbf{14}$ and $\mathbf{16}\,\mathrm{cm}$.

3(d)

  • Move the lens slowly back and forth to find the sharpest image.
  • Read the ruler at right angles to its scale to avoid parallax error.

3(e)(i)

  • Take five sets of readings, so there are enough points to draw a graph.

3(e)(ii)

  • A line of best fit averages the scatter in the readings, so its gradient gives a more reliable focal length.
Original question

Log in or create account

IGCSE, A-Level & AP