Skip to content

IGCSE Physics · June 2022 · Paper 52 · Difficulty 3 · Standard

Question 1

1

In this experiment, you will investigate the balancing of a metre rule.

Carry out the following instructions, referring to Fig. 1.1.

(a)

• Place the metre rule on the pivot at the 50.0 cm mark.

  • Place object P with its centre on the metre rule at the 10.0 cm mark.
(i)

Record, in Table 1.1, the distance $a$ from the centre of object P to the pivot.[1]

(ii)

• Place object Q on the metre rule.

  • Keep object P at the 10.0 cm mark and adjust the position of object Q until the metre rule is as close to balancing as possible.

Record, in Table 1.1, the distance $b$ between the centre of object Q and the pivot.[1]

(iii)

Repeat the steps above with object P placed at the 15.0 cm mark, 20.0 cm mark, 25.0 cm mark and 30.0 cm mark.

Record all the values of $a$ and $b$ in Table 1.1.

Table 1.1

$a$ / cm$b$ / cm

[2]

(b)

Plot a graph of $a$ / cm ($y$-axis) against $b$ / cm ($x$-axis). You do not need to start your graph from the origin (0, 0).

[4]

(c)

Determine the gradient $G$ of the graph.

Show clearly on the graph how you obtained the necessary information.

$G =$ [3]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • The distance from the pivot to P is $a = 50.0\,\mathrm{cm} - 10.0\,\mathrm{cm} = \mathbf{40.0}\,\mathrm{cm}$.

1(a)(ii)

  • Balance the rule, then measure from the pivot to the centre of Q. The reading depends on your apparatus and should be no more than $30.0\,\mathrm{cm}$.

1(a)(iii)

  • Use $a = 50.0\,\mathrm{cm} - \text{position of P}$, so the new values are $\mathbf{35.0}$, $\mathbf{30.0}$, $\mathbf{25.0}$ and $\mathbf{20.0}\,\mathrm{cm}$.
  • Balance the rule each time and measure $b$. The values of $b$ should decrease; record all distances to the nearest $0.1\,\mathrm{cm}$.

1(b)

  • Label the horizontal axis $b / \mathrm{cm}$ and the vertical axis $a / \mathrm{cm}$. Choose scales that use much of the grid.
  • Plot each measured pair to within half a small square. Draw a thin, continuous best-fit line through the trend of the points.

1(c)

  • Draw a gradient triangle on the best-fit line, covering at least half the line between the extreme points.
  • Use $G = \Delta a / \Delta b$. Divide the vertical change by the horizontal change using two points on the line.
  • The result depends on your graph; a typical result is $\mathbf{1.8}$ to $\mathbf{2.2}$.
Original question

Log in or create account

IGCSE, A-Level & AP