Skip to content

IGCSE Physics · June 2022 · Paper 42 · Difficulty 4 · Challenging

Question 10

10

Fig. 10.1 is a simplified diagram of a digital circuit. The output of logic gate Y controls a buzzer.

Fig. 10.1
(a)

Complete Table 10.1, the truth table for the circuit.

Table 10.1

input Ainput Boutput of Xoutput of Y
00
01
10
11

[3]

(b)

Input A is the output of a humidity sensor which gives logic 1 when the humidity is high and logic 0 when the humidity is low.

Input B is the output of a light sensor which gives logic 1 in bright light and logic 0 in darkness. The buzzer sounds when the output of Y is logic 1.

State the conditions of humidity and light when the buzzer is on.[1]

(c)

The output of the digital circuit alone is not able to operate the buzzer.

Ring the component from the list that must be connected between the output of the digital circuit and the buzzer.

fuse heater relay resistor thermistor

Explain your answer.[3]

[Total: 7]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

10(a)

  • X reverses input A. Y is 1 only when both its inputs, X and B, are 0.
  • For inputs A, B in the order 00, 01, 10, 11, the outputs of X are 1, 1, 0, 0.
  • In the same row order, the outputs of Y are 0, 0, 1, 0.

10(b)

  • The buzzer is on when humidity is high and it is dark.

10(c)

  • Use a relay.
  • The gate can provide the small current needed in the relay coil; the relay switches a separate circuit that supplies the larger current needed by the buzzer.
Original question

Log in or create account

IGCSE, A-Level & AP