Skip to content

IGCSE Physics · June 2021 · Paper 41 · Difficulty 4 · Challenging

Question 7

7

Fig. 7.1 represents an alternating current (a.c.) generator.

Fig. 7.1
(a)

A student rotates the handle H, as shown in Fig. 7.1.

(i)

On Fig. 7.2, sketch a graph to show how the electromotive force (e.m.f.) between terminals X and Y varies with time during two complete revolutions of the coil.

Fig. 7.2

[3]

(ii)

On Fig. 7.2, mark and label a point P, for the e.m.f. when the coil is horizontal, as shown in Fig. 7.1.[1]

(iii)

The student turns the handle more quickly.

State two ways in which the e.m.f. between terminals X and Y changes.

[2]

(b)

Terminals X and Y are connected to the primary coil of a transformer.

State and explain what happens in the transformer as the student turns the handle of the a.c. generator.[3]

(c)

Explain why the power losses in transmission cables are lower when electrical energy is transmitted at higher voltages.[2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

7(a)(i)

  • Label the vertical axis e.m.f. and the horizontal axis time.
  • Draw two complete sinusoidal cycles with constant amplitude and period.

7(a)(ii)

  • Mark P at a peak or trough of the e.m.f. graph.

7(a)(iii)

  • The maximum e.m.f. increases.
  • The frequency increases, so the e.m.f. changes direction more often.

7(b)

  • The generator sends alternating current through the primary coil.
  • This produces a changing magnetic field in the transformer.
  • The changing field induces an alternating e.m.f. in the secondary coil.

7(c)

  • For the same transmitted power, a higher voltage means a smaller current.
  • Less thermal energy is then lost in the cables.
Original question

Log in or create account

IGCSE, A-Level & AP