Skip to content

IGCSE Physics · June 2020 · Paper 53 · Difficulty 3 · Standard

Question 3

3

In this experiment you will determine the focal length of a converging lens. Carry out the following instructions, referring to Fig. 3.1.

Method 1

(a)

Arrange the apparatus as shown in Fig. 3.1.

Place the lens a distance $u = 20.0\text{ cm}$ from the illuminated triangle.

Place the screen near the lens.

Move the screen until a sharp image of the triangle is seen on the screen.

(i)

Measure the distance $v$ between the lens and the screen as indicated in Fig. 3.1.

$v =$ [1]

(ii)

Calculate a value $f_1$ for the focal length of the lens. Use the equation

$$f_1 = \frac{uv}{(u + v)}.$$

$f_1 =$ [1]

Method 2

(b)

Keep the screen in the same position so that the values of $u$ and $v$ are the same as in (a).

(i)

Move the lens closer to the screen until another sharp image of the triangle is seen on the screen.

Measure the new distance $u$ between the illuminated triangle and the lens as indicated in Fig. 3.2.

$u =$

Measure the new distance $v$ between the lens and the screen.

$v =$ [2]

(ii)

Calculate a second value $f_2$ for the focal length of the lens. Use the equation

$$f_2 = \frac{uv}{(u + v)}.$$

$f_2 =$ [1]

Method 3

(c)

Keep the screen in the same position so that the values of $u$ and $v$ are the same as in (b).

(i)

Measure $h_{\text{O}}$, the height of the illuminated triangle, as indicated in Fig. 3.2.

$h_{\text{O}}=$

Measure $h_{\text{I}}$, the height of the image of the triangle on the screen.

$h_{\text{I}} =$ [1]

(ii)

Calculate a value $M$ for the magnification, using the equation $M = \frac{h_{\text{I}}}{h_{\text{O}}}.$

$M =$ [1]

(iii)

Calculate a third value $f_3$ for the focal length of the lens. Use your value of $v$ from (b)(i) and the equation

$$f_3 = \frac{v}{(M + 1)}.$$

$f_3 =$ [1]

(d)

State one precaution that you took to ensure that the measurements of $u$ and $v$ in this experiment are as reliable as possible.

[1]

(e)
(i)

Explain why Method 3 is likely to produce a less accurate value for the focal length than Method 1.

[1]

(ii)

Suggest one improvement to make Method 3 more accurate.

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)(i)

  • Measure $v$ from the centre of the lens to the screen when the image is sharp. Record it in $\mathrm{cm}$.
  • An expected reading is between $42\,\mathrm{cm}$ and $88\,\mathrm{cm}$. Fig. 3.1 is a layout diagram, not a scale drawing, so it cannot give the actual reading.

3(a)(ii)

  • Use the lens equation in the given form: $f_1 = uv/(u+v)$.
  • With $u = 20.0\,\mathrm{cm}$, $f_1 = \mathbf{\dfrac{(20.0\,\mathrm{cm})v}{20.0\,\mathrm{cm}+v}}$. Insert your measured $v$ in $\mathrm{cm}$; the result is in $\mathrm{cm}$.

3(b)(i)

  • Move the lens towards the fixed screen until a second sharp image forms. Measure both distances from the centre of the lens, in $\mathrm{cm}$.
  • The new $u$ should be close to the old $v$, within about $10\%$. The new $v$ should be close to the old $u$: between $18\,\mathrm{cm}$ and $22\,\mathrm{cm}$.
  • The object and image distances roughly exchange places. Actual numerical answers require measurements of this second lens position.

3(b)(ii)

  • Use $f_2 = uv/(u+v)$ with the new distances from (b)(i).
  • Insert both measured distances in $\mathrm{cm}$: $f_2 = \mathbf{\dfrac{uv}{u+v}}$, in $\mathrm{cm}$. Give $f_1$ and $f_2$ to the same two or three significant figures.

3(c)(i)

  • Measure the vertical height $h_O$ of the illuminated triangle and the vertical height $h_I$ of its sharp image. Use the same unit, such as $\mathrm{cm}$, for both.
  • In this lens position the image is smaller than the object; its expected height is below $1.0\,\mathrm{cm}$. The actual heights must be measured on the apparatus.

3(c)(ii)

  • Use magnification $M = h_I/h_O$.
  • Divide the measured image height by the object height, both in $\mathrm{cm}$: $M = \mathbf{\dfrac{h_I}{h_O}}$. The units cancel, so magnification has no unit.

3(c)(iii)

  • Use $f_3 = v/(M+1)$, with $v$ from (b)(i) and your calculated magnification.
  • Insert $v$ in $\mathrm{cm}$: $f_3 = \mathbf{\dfrac{v}{M+1}}$, in $\mathrm{cm}$. The expected result is between $12.0\,\mathrm{cm}$ and $18.0\,\mathrm{cm}$; an exact value needs your readings.

3(d)

  • Read the scale with your eye directly above it to avoid parallax error.

3(e)(i)

  • The image is small, so its height is difficult to measure accurately. This makes the calculated focal length less accurate.

3(e)(ii)

  • Use a larger object so the image is larger and its height is easier to measure.
Original question

Log in or create account

IGCSE, A-Level & AP