Skip to content

IGCSE Physics · June 2020 · Paper 51 · Difficulty 3 · Standard

Question 1

1

In this experiment, you will investigate the balancing of a metre rule.

Carry out the following instructions, referring to Fig. 1.1.

(a)
  • Place the metre rule on the pivot at the 50.0 cm mark.
  • Place the object Q with its centre on the metre rule at the 90.0 cm mark.
  • Place a load of weight P = 2.0 N on the metre rule.
  • Adjust the position of the load so that the metre rule is as near as possible to being balanced and horizontal.
(i)

Measure, and record in Table 1.1, the distance x from the centre of the load to the pivot.

Record also the weight of the load.[1]

(ii)

Calculate, and record in Table 1.1, the value of $\frac{1}{x}$.[1]

(iii)

Repeat the steps above, using loads of weight P = 3.0 N, 4.0 N, 5.0 N and 6.0 N. Record all the values of P, x and $\frac{1}{x}$ in Table 1.1.[3]

P/Nx /cm$\frac{1}{x}$ /cm$^{-1}$
(b)

Plot a graph of P/N (y-axis) against $\frac{1}{x}$ /cm$^{-1}$ (x-axis). Start both axes at the origin (0,0).

[4]

(c)

In this experiment, $x_{max}$, the maximum possible value for x is 50.0 cm. Calculate $\frac{1}{x_{max}}$.

$\frac{1}{x_{max}}$ = cm$^{-1}$

Use the graph to determine the minimum value of P required to balance the metre rule in this experiment. Show clearly on the graph how you determined this value.

minimum value of P = [2]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)(i)

  • Record $P = \mathbf{2.0}\,\mathrm{N}$. Measure $x$ from the centre of the load to the pivot; it should be about $35$–$45\,\mathrm{cm}$. Your value depends on your apparatus.

1(a)(ii)

  • Use $1/x$ for the reciprocal. For example, if $x = 40.0\,\mathrm{cm}$, then $1/x = 1/(40.0\,\mathrm{cm}) = \mathbf{0.0250}\,\mathrm{cm^{-1}}$. Use your own measurement.

1(a)(iii)

  • Record $P = \mathbf{3.0,\ 4.0,\ 5.0,\ 6.0}\,\mathrm{N}$. Balance the rule each time and measure $x$; the distances should decrease and be less than $40\,\mathrm{cm}$.
  • Use $1/x$ to calculate each reciprocal. For example, $1/(20.0\,\mathrm{cm}) = \mathbf{0.0500}\,\mathrm{cm^{-1}}$. Give the reciprocals to a consistent number of significant figures.

1(b)

  • Label the horizontal axis $1/x\,/\,\mathrm{cm^{-1}}$ and the vertical axis $P\,/\,\mathrm{N}$. Start both at zero and choose scales that use the grid well.
  • Plot each pair of readings within half a small square. Draw a thin, continuous best-fit line through the trend of the points.

1(c)

  • Use the reciprocal $1/x_{\max}$. With $x_{\max} = 50.0\,\mathrm{cm}$, $1/x_{\max} = 1/(50.0\,\mathrm{cm}) = \mathbf{0.0200}\,\mathrm{cm^{-1}}$.
  • From $0.0200\,\mathrm{cm^{-1}}$ on the horizontal axis, draw up to your line, then across to the $P$ axis. Read the minimum $P$ to within half a small square; it depends on your graph.
Original question

Log in or create account

IGCSE, A-Level & AP