Skip to content

IGCSE Physics · June 2020 · Paper 42 · Difficulty 3 · Standard

Question 8

8
(a)

A light-emitting diode (LED) is a diode that emits light when there is a current in it. Draw a circuit diagram showing an LED, connected so that it is lit, in series with a battery and a fixed resistor. Use standard electrical symbols.[4]

(b)

The p.d. across the LED when lit is 3.1V and the current in the LED is 0.030A.

Calculate the value of the resistance of the LED when lit.

resistance = [2]

(c)

Fig. 8.1 shows a power supply of e.m.f. 10.5V connected in series with a lamp and a heater. The p.d. across the lamp is 2.1V and the current in the lamp is 1.5A.

Fig. 8.1

Calculate:

(i)

the resistance of the heater

resistance = [2]

(ii)

the power of the heater.

power = [2]

[Total: 10]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

8(a)

  • Draw a battery, fixed resistor and LED in one closed series loop using their standard symbols.
  • Draw the LED symbol with two arrows pointing outwards and its anode towards the battery positive terminal, so it conducts.

8(b)

  • Use resistance $R = V/I$.
  • $R = 3.1\,\mathrm{V}/(0.030\,\mathrm{A}) = \mathbf{100}\,\mathrm{\Omega}$.

8(c)(i)

  • Use $V_{\mathrm{heater}} = V_{\mathrm{supply}}-V_{\mathrm{lamp}}$ and $R = V/I$.
  • $V_{\mathrm{heater}} = 10.5\,\mathrm{V}-2.1\,\mathrm{V} = 8.4\,\mathrm{V}$.
  • $R = 8.4\,\mathrm{V}/(1.5\,\mathrm{A}) = \mathbf{5.6}\,\mathrm{\Omega}$.

8(c)(ii)

  • Use power $P = VI$.
  • $P = (8.4\,\mathrm{V})(1.5\,\mathrm{A}) = \mathbf{12.6}\,\mathrm{W}$.
Original question

Log in or create account

IGCSE, A-Level & AP