Skip to content

IGCSE Physics · June 2020 · Paper 42 · Difficulty 4 · Challenging

Question 4

4

Fig. 4.1 shows a liquid-in-glass thermometer without a temperature scale. The liquid inside the thermometer has a melting point of –39°C.

(a)

Describe simple experiments to mark the positions of the fixed points on this liquid-in-glass thermometer.[4]

(b)

A scientist is measuring temperatures at the South Pole. These temperatures have a minimum value of –90°C.

State why the liquid used in the thermometer in Fig. 4.1 would not be suitable for this scientist.[1]

(c)

State a design change that:

(i)

increases the sensitivity of a liquid-in-glass thermometer[1]

(ii)

increases the range of a liquid-in-glass thermometer.[1]

(d)

State the property of the liquid which ensures that the scale on a liquid-in-glass thermometer is linear.[1]

[Total: 8]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

4(a)

  • Place the bulb in pure melting ice. When the liquid level stops moving, mark it as $0\,\mathrm{°C}$.
  • Place the bulb in steam above boiling water at normal atmospheric pressure. When the level stops moving, mark it as $100\,\mathrm{°C}$.

4(b)

  • The liquid freezes below $-39\,\mathrm{°C}$, so it cannot measure down to $-90\,\mathrm{°C}$.

4(c)(i)

  • Use a narrower tube, so the same expansion gives a larger movement of the liquid.

4(c)(ii)

  • Use a longer tube, so a wider range of liquid levels can be measured.

4(d)

  • The liquid must expand by equal amounts for equal temperature increases.
Original question

Log in or create account

IGCSE, A-Level & AP