Skip to content

IGCSE Physics · March 2025 · Paper 52 · Difficulty 3 · Standard

Question 1

1

In this experiment, you will investigate the behaviour of a spring and use it to determine the mass of an object.

A stand and spring have been set up for you.

Refer to Fig. 1.1.

(a)

Suspend a mass $m = 100\text{ g}$ from the spring as shown in Fig. 1.1.

Measure, and record in Table 1.1, the stretched length $l$ of the spring, as indicated in Fig. 1.1.

Repeat this step for values of $m = 200\text{ g}$, $m = 300\text{ g}$, $m = 400\text{ g}$ and $m = 500\text{ g}$.

Remove the mass $m$ from the spring.

Table 1.1

$m/\text{g}$$l / \text{cm}$
100
200
300
400
500

[2]

(b)

Describe a technique you used when measuring the length of the spring, to ensure an accurate reading. You may draw a diagram.[1]

(c)

Plot a graph of $l /\text{cm}$ ($y$-axis) against $m/\text{g}$ ($x$-axis).

Start the axes from the origin $(0,0)$.

Draw a best-fit straight line. The line might not go through the origin.

[4]

(d)

Use the graph to determine the length $l_0$ of the spring with no load on it.

$l_0 =$ cm[1]

(e)

Suspend object X from the spring and measure the stretched length $l_\text{X}$ of the spring.

$l_\text{X} =$ cm

Use the graph and your value of $l_\text{X}$, to determine the mass $m_\text{X}$ of object X. Show clearly on the graph how you obtained your answer.

$m_\text{X} =$ g[2]

(f)

Two students measure the mass of another object using the same method and apparatus. One student records the mass as $132.6\text{ g}$. The other student records the mass as $130\text{ g}$.

State and explain which answer has the more suitable number of significant figures for this experiment.

statement

explanation [1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

1(a)

  • Measure the length of the coils for each of the five masses. Record each length to the nearest $0.1\,\mathrm{cm}$, or $1\,\mathrm{mm}$.
  • The readings should increase as the mass increases because the spring stretches more.

1(b)

  • View the scale at right angles to the ruler to avoid a parallax error.

1(c)

  • Label the horizontal axis $m / \mathrm{g}$ and the vertical axis $l / \mathrm{cm}$. Start both axes at zero.
  • Choose even scales so the points use at least half of the grid. Plot each reading to within half a small square.
  • Draw a thin best-fit straight line through the trend of the points. Do not force it through the origin.

1(d)

  • Read the length where the best-fit line crosses the vertical axis. At this point $m = 0$, so the reading is $l_0$.

1(e)

  • Measure and record $l_X$. From this length on the vertical axis, draw across to the best-fit line, then down to the mass axis.
  • Read $m_X$ from the mass axis. The expected range is $\mathbf{295}$ to $\mathbf{365}\,\mathrm{g}$; the reading depends on your graph.

1(f)

  • $\mathbf{130}\,\mathrm{g}$ is more suitable because the apparatus does not measure the mass precisely enough to justify the extra digits in $132.6\,\mathrm{g}$.
Original question

Log in or create account

IGCSE, A-Level & AP