Skip to content

IGCSE Physics · March 2020 · Paper 42 · Difficulty 4 · Challenging

Question 8

8

Fig. 8.1 shows a circuit.

Fig. 8.1

The lamp has a resistance of $3.0\Omega$ . Line XY represents a uniform resistance wire of resistance $6.0\Omega$ .

(a)

Calculate the reading on the ammeter.

ammeter reading = [2]

(b)

Fig. 8.2 shows the circuit with a different connection to the resistance wire and an added resistor. The length XY of the whole resistance wire is 2.0 m. The contact is made at Q where the distance XQ is 0.60 m.

Fig. 8.2

Calculate the resistance of the circuit.

resistance = [4]

[Total: 6]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

8(a)

  • For series resistors, $R = R_1 + R_2 + R_3$; use $I = V/R$.
  • $R = 3.0\,\mathrm{\Omega} + 2.0\,\mathrm{\Omega} + 6.0\,\mathrm{\Omega} = 11.0\,\mathrm{\Omega}$.
  • $I = (12\,\mathrm{V})/(11.0\,\mathrm{\Omega}) = \mathbf{1.1}\,\mathrm{A}$.

8(b)

  • Resistance is proportional to length, so $R_{XQ} = R_{XY}l_{XQ}/l_{XY}$.
  • $R_{XQ} = (6.0\,\mathrm{\Omega})(0.60\,\mathrm{m})/(2.0\,\mathrm{m}) = 1.8\,\mathrm{\Omega}$.
  • For the parallel part, $R_p = R_1R_2/(R_1+R_2) = (1.5\,\mathrm{\Omega})(1.8\,\mathrm{\Omega})/(3.3\,\mathrm{\Omega}) = 0.82\,\mathrm{\Omega}$.
  • Add the series resistances: $R = 3.0\,\mathrm{\Omega} + 2.0\,\mathrm{\Omega} + 0.82\,\mathrm{\Omega} = \mathbf{5.8}\,\mathrm{\Omega}$.
Original question

Log in or create account

IGCSE, A-Level & AP