Skip to content

IGCSE Physics · November 2025 · Paper 63 · Difficulty 3 · Standard

Question 3

3

A student investigates the image produced by a converging lens.

He uses the equipment shown in Fig. 3.1.

(a)

The student sets the distance $u$ between the illuminated triangular object and the lens to 20.0 cm. He moves the screen until a sharp image of the illuminated triangular object is seen on the screen.

Briefly describe one technique to obtain an image on the screen which is as sharp as possible in this experiment.[1]

[1]

(b)
(i)

The screen is shown full size in Fig. 3.2.

Measure, and record in the first line of Table 3.1, the height $h_I$ of the image on the screen, as shown in Fig. 3.2.

$u$/cm$h_I$/cm$D/\frac{1}{\text{cm}}$
20.0
25.02.80.36
30.02.00.50
35.01.60.63
40.01.20.83
(ii)

For distance $u = 20.0$ cm, calculate, and record in Table 3.1, a value $D$.

Use your value of $h_I$ from Table 3.1 and the equation:

$D = \frac{1}{h_I}$.

(c)

The student repeats the procedure for $u = 25.0$ cm, $u = 30.0$ cm, $u = 35.0$ cm and $u = 40.0$ cm.

His results are shown in Table 3.1.

Plot a graph of $u$ /cm (y-axis) against $D/\frac{1}{\text{cm}}$ (x-axis). Start the axes at the origin (0,0).

Draw a best-fit straight line.[4]

(d)
(i)

From your graph, determine $u_0$, the value of $u$ when $D$ is zero.

$u_0 = ....................................................$ cm[1]

(ii)

Determine the gradient $G$ of the graph.

Show clearly on the graph how you obtained the necessary information.

$G = ..........................................................$[1]

(e)

The illuminated object is shown full size in Fig. 3.3.

Measure and record the height $h_O$ of the illuminated triangular object shown in Fig. 3.3.

$h_O = ..........................................................$ cm

Calculate the focal length $f$ of the lens. Use your value of $h_O$, your value of $G$ from (d)(ii) and the equation:

$f = \frac{G}{h_O} \times k$, where $k = 1.0 \text{ cm}^2$.

$f = ..........................................................$ cm[1]

(f)

Describe one difficulty that can be experienced when measuring the height of the image in this experiment.

Suggest an improvement to overcome this difficulty.

difficulty

improvement

[1]

[Total: 11]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

3(a)

  • Move the screen slowly backwards and forwards around the best position until the image is sharpest.

3(b)(i)

  • Measure the image on the full-size figure: $h_I = \mathbf{6.0}\,\mathrm{cm}$.

3(b)(ii)

  • Use $D = 1/h_I$.
  • $D = 1/(6.0\,\mathrm{cm}) = \mathbf{0.17}\,\mathrm{cm^{-1}}$.

3(c)

  • Label the horizontal axis $D/\mathrm{cm^{-1}}$ and the vertical axis $u/\mathrm{cm}$, both starting at zero. Use scales that occupy at least half the grid.
  • Plot all five pairs accurately and draw a thin straight line of best fit through the trend.

3(d)(i)

  • Read the intercept where the best-fit line crosses $D = 0$: $u_0 \approx \mathbf{14.4}\,\mathrm{cm}$. Your value depends on your line.

3(d)(ii)

  • Use $G = \Delta u/\Delta D$ and mark a large gradient triangle on the best-fit line.
  • For example, $G = (39.4\,\mathrm{cm} - 20.6\,\mathrm{cm})/(0.80\,\mathrm{cm^{-1}} - 0.20\,\mathrm{cm^{-1}}) \approx \mathbf{31.3}\,\mathrm{cm^2}$.

3(e)

  • The measured object height is $h_O = 2.2\,\mathrm{cm}$.
  • Use $f = (G/h_O)k$. In this formula, use the numerical gradient from (d)(ii), $G = 31.3$, and $k = 1.0\,\mathrm{cm^2}$.
  • $f = \dfrac{31.3}{2.2\,\mathrm{cm}}\times 1.0\,\mathrm{cm^2} = \mathbf{14.2}\,\mathrm{cm}$. Your result depends on your graph.

3(f)

  • A ruler can block the image; mark the image on the screen first, then measure the marks.
Original question

Log in or create account

IGCSE, A-Level & AP