Skip to content

IGCSE Physics · November 2025 · Paper 33 · Difficulty 2 · Core

Question 7

7
(a)

A student is making a torch.

(i)

The torch needs a potential difference (p.d) of 6.0V. The electromotive force (e.m.f.) of each cell for the torch is 1.5V.

State the number of cells that the torch needs.

number of cells = [1]

(ii)

The student has the following components for the electrical part of the torch:

a 6.0V lamp

a switch

several 1.5V cells

connecting wire

Draw a circuit diagram to show how the components are connected in series to make the torch. Use standard circuit symbols.[3]

(b)

The p.d. across the lamp is 6.0V.

The current in the lamp is 0.25A

(i)

Calculate the resistance of the lamp.

resistance = Ω[3]

(ii)

Calculate the power of the lamp.

power = W[3]

[Total: 10]

Show the mark scheme

These are the official mark-scheme rows. Each point that matches your answer earns a mark.

Tap the mark scheme to open it full size.

Show a worked answer

How to reach each mark, step by step. Try the question yourself first.

7(a)(i)

  • For cells in series, use $V_{\mathrm{total}} = nV_{\mathrm{cell}}$, so $n = V_{\mathrm{total}}/V_{\mathrm{cell}}$.
  • $n = \frac{6.0\,\mathrm{V}}{1.5\,\mathrm{V}} = \mathbf{4}$ cells. Connect them in the same direction so their voltages add.

7(a)(ii)

  • The circuit below has four cells, a lamp and a switch in series. The cell voltages add to $6.0\,\mathrm{V}$.
Worked answer drawing

7(b)(i)

  • Use $R = V/I$ to find the resistance from the p.d. and current.
  • $R = \frac{6.0\,\mathrm{V}}{0.25\,\mathrm{A}} = \mathbf{24}\,\Omega$.

7(b)(ii)

  • Use $P = VI$ to find the electrical power of the lamp.
  • $P = (6.0\,\mathrm{V})(0.25\,\mathrm{A}) = \mathbf{1.5}\,\mathrm{W}$.
Original question

Log in or create account

IGCSE, A-Level & AP